- Megaphone Exhaust 615SSmennessä MADMAXsopii:
- HONDA glom (MSX125)
Installation is tricky. This was not made to fit correctly without some modifications to the support bracket. The lowest hole in the bracket needs to be expanded so that there would be little to no ...Lue lisää - Megaphone Exhaust Systemmennessä MADMAXsopii:
- HONDA glom (MSX125)
Immediately after the change, there was a feeling that the high revolution range was capped, but it seemed just to not have been turned at NORMAL. The sound is also comfortable, it has become a feelin...Lue lisää - Megaphone Exhaust Systemmennessä MADMAXsopii:
- HONDA glom (MSX125)
A little Rivet part rubbed against Swingarm, so we attached the included Bracket and Exhaust Bracket by bending. Sound is good sound with heavy bass. I feel like I am not good at high speed range, but...Lue lisää - Custom Short Lever Setmennessä MADMAXsopii:
- HONDA CBR250R MC41
- HONDA GROM
- HONDA MSX
Worn on New Year 16-year Grom. Is this something like Short lever. The six-step adjustment is good, but I changed it much, and when I think about the sharpness I felt that I was determined with a sing...Lue lisää - sopii:
- HONDA GROM (MSX125)
very nice and good for MSX, price is good, but can be better.fast shipment with good packing, good exprience for online shopping.Lue lisää - DJ1 Rear Suspensionmennessä MADMAXsopii:
- HONDA glom (MSX125)
OHLINS is bad Copy goods.There are many defect reports reported on this siteThe most severe thing is that the core in the middle is broken and it is extremely dangerous* The image is already p for peo...Lue lisää - sopii:
- HONDA GROM (MSX125)
Since the Bracket of the Aluminum Carrier attached so far was cracked, it was exchanged.Since it is an exchange from Aluminum, the weight is not so heavy. Just design fell at first sightSo I was satis...Lue lisää - Custom seat TYPE-Hmennessä MADMAXsopii:
- HONDA
There is a gap behind you?Can not you ride on a rainy day?I am sorry to have trusted it because it is Japanese Manufacturer ??Evaluation of other people 's impressions was goodI wonder how to inst...Lue lisää - DJ1 Rear Suspensionmennessä MADMAXsopii:
- HONDA glom (MSX125)
Purchased at Wee Big at 10,933 yen.installation method : Remove both SIDE's Shroud and loosen Bolt.I was thinking of preparing Maintenace Stand or Jack, but adjusting the Bolt hole by adjusting th...Lue lisää - Custom seat TYPE2mennessä MADMAXsopii:
- HONDA Grom(MSX125) 13-16
Honda Grom has a poor fitting ability on Small handle and it is popular that Seat is hard and it hurts at long distance Touring, but I thought that I would improve a bit, I exchanged Seat.For Replacem...Lue lisää - Handlebar Switch Covermennessä MADMAXsopii:
- HONDA GROM (MSX125)
I understood that it was a type of covering, but since I did not have the actual mounting photo, I was worried after purchasing. Also, because there was no installation explanation, remove Body or ins...Lue lisää - Handlebar Switch Covermennessä MADMAXsopii:
- HONDA GROM (MSX125)
There was no manual. I ordered only to cover it, but I can not fit without the gap between Grip and Body. Move Body easily and easy to install. The same is true for the Axel side. Detail Screwdriver +...Lue lisää - Under Cowlmennessä MADMAXsopii:
- HONDA Grom(MSX125) JC61
First of all, Cowl's combination did not match, I cut it a little and managed it somehow.Even if you are trying to install it, neither the position nor Bolt will fit in the attached one.Lue lisää - Thick Side Standmennessä MADMAXsopii:
- HONDA GROM (MSX125)
I decided to purchase because OEMParts was cheap and difficult to put out rather than for Dress-up. Although it is a slightly flashy product, I may have matched the car body because I installed a lot ...Lue lisää - Shroud (Side Duct) TYPE2mennessä MADMAXsopii:
- HONDA GROM MSX125
Previously, if you attempted to install a similar garishishu, you can not install it with the included Double-sided Tape, and it got flying while driving with a glue. As a result, since the part to be...Lue lisää - CNC Clutch Cable Guidemennessä MADMAXsopii:
- HONDA GROM (MSX125)
It is not something effective.Self-satisfied thing.The Bolt hole is good, but the convex hole is Large rinse and subtle.Since it is only looks it does not matter so it has never been cheap.Lue lisää - sopii:
- HONDA GROM (MSX125)
Color desired when purchased in July : Because Yellow was out of stock, I bought White. Although there was no problem with Parts, after all I could not be satisfied with Color, and because it is inexp...Lue lisää - Rear Sprocketmennessä MADMAXsopii:
- HONDA GROM (MSX125)
Crimp which connects aluminum part and iron part is broken at two places.Only 100 km traveledI just happened to discover it while refueling Chain and it did not reach Large thing.In the unlikely event...Lue lisää - Steering Stem Nutmennessä MADMAXsopii:
- HONDA GROM (MSX125)
OEM's Stem Nut is 30 mmPurchase 30 mm Socket wrench for removalBut the size of this product is 28 mmI was tightened with MONKEY without any help but it was full of scratches!Lue lisää - 12-Inch Wheel Setmennessä MADMAXsopii:
- HONDA GROM (MSX125)
Wound is a little conspicuous, but it does not matter if you install it.Just because it's heavy compared to OEM, we can eat Power as much as possible.Even at least Brake is ineffective unless Pad ...Lue lisää
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING