- sopii:
- SUZUKI ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.
- SUZUKI ST250 E Type -07 NJ4AA *Processing of switch holes required|* Normal side caps can be used.
- SUZUKI RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
- ...ja enemmän.
Timing was not available for Tommaselli, so I bought it in timeThe looks and Position are great, but … it won't pass inspection. wLue lisää - sopii:
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW200 -99 (drum brakes)
- Others Universal
- ...ja enemmän.
It was not suitable for me, although it is a part that cannot be helped because it is something that cannot be understood until it is put on.The atmosphere is that of a family car.I thought it was too...Lue lisää - sopii:
- KAWASAKI ZRX400 -04
- KAWASAKI ZrX1200ZrX1200 DAEG
- KAWASAKI ZRX1200R
- KAWASAKI ZRX1100II
- KAWASAKI ZRX1100
- ...ja enemmän.
As always the package reached on time. Tool is very light and serves it purpose. Quality and craft of tool is great and will stand for a long period of time. Great product and recommended to have.Lue lisää - sopii:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...ja enemmän.
[How is it used?I changed XJR400R from OEM Handlebar to this Condor Handle.Was the one you received as per Image?The precision of the construction is good and the shape is cool.Was the installation di...Lue lisää - sopii:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...ja enemmän.
Not a lot you can say about handlebars. They look good and seem to be of a high quality, time will tell. However there are a few points worth mentioning. There is a manufacturers sticker where the gri...Lue lisää - sopii:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...ja enemmän.
Separate Handlebars were out of stock, so I put the Condor Handle on backwards and tilted it forward. It is very forward leaning and narrow, so I think it will be strange to use Large until I get used...Lue lisää - sopii:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...ja enemmän.
I replaced Handlebar to immeChain.The height of the handlebar is now much lower.It's so much easier to ride.Lue lisää - sopii:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...ja enemmän.
I put it on my st250, but the OEM handlebar made me look awkward when riding.The quality is not luxurious, but it feels solid!Lue lisää - sopii:
- HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
- HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
- HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
- HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter)
- HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID)
- ...ja enemmän.
This is a change from Plating of the same type.On the LeftGrip side, there is a paper seal with the product number, ManufacturerMain and product name, which is still difficult to remove.If you could m...Lue lisää - sopii:
- HONDA CB400SUPER BOLDOR 05-13 NC39 vtec III
- HONDA CB400SF 99-16 vtec II
- HONDA CB400SF 99-16 vtec III
- HONDA HORNET600 98-02 PC34
- HONDA HORNET250 96-07 MC31
- ...ja enemmän.
I bought this for One point of the Stem section.The color is bright and beautiful, but is it shallow in the depth direction?When I installed it, I couldn't tighten it to the end and it was fixed as if...Lue lisää - sopii:
- KAWASAKI ZEPHYRX *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
- KAWASAKI ZEPHYR400 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
- HONDA NC700S 12 (Excluding ABS and DCT models)*Processing of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
- YAMAHA XJR400R 01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward.
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- ...ja enemmän.
[How is it used?I wanted to replace the Grip and Bar End while I was doing the Lever replacement, so I replaced the Handlebar too!Was the one you received as per Image?While slightly lower than OEM, n...Lue lisää - sopii:
- YAMAHA MT03
- HONDA CB500X
- YAMAHA BRONCO 97-99 5BT
- YAMAHA XG250 TRICKER 04-16 DG16J
- YAMAHA XG250 TRICKER 04-16 DG10J
- ...ja enemmän.
I used it on my MT-03.It can be installed without any problem.Because I used it in combination with EZ-FIT BAR this time.Throttle Cable is no longer delivered.In this case, it can be processed or long...Lue lisää - Long Throttle Cable Wmennessä HURRICANEsopii:
- HONDA VTR250 03-07 MC33 (1020001-1299999)(75mm long)
- HONDA VTR250 98-02 MC33 (up to 1019999)(100mm long)
I bought this product of 100mm long because the accelerator wire was stretched to the limit by 30mm up of the handlebar and it seemed to apply unreasonable force.Long enough to reach Light's Lens when...Lue lisää - Long Clutch Cablemennessä HURRICANEsopii:
- HONDA VTR250 03-16 MC33(1020001-)(125mm long)
- HONDA VTR250 98-02 MC33(up to 1019999)(100mm long)
When I upgraded the Handlebar, I couldn't reach the OEM, so I replaced it with this product of 100mmLong.I thought it would be long because it is 100mm long while I raised the Handlebar by 30mm, but t...Lue lisää - sopii:
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW200 -99 (drum brakes)
- Others Universal
- ...ja enemmän.
[How is it used?The width of the OEM Handlebar of 250TR was too wide and it was difficult to ride, so I replaced it with this product.Was the one you received as per Image?It was an inexpensive produc...Lue lisää - sopii:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...ja enemmän.
Replaced the Handlebar width to make it narrower for the VANVAN200 Custom.The Image is approximately half a fist inside and one handful down from OEM.As a result, it is easy to slip through and I am g...Lue lisää - sopii:
- KAWASAKI ZRX400II *Requires drilling of switch hole|*Applicable side cap (for 18mm dia.)|*Cannot be installed on models 05 and later due to interference with the cowl.
- KAWASAKI W400 *Required Switch Hole Drilled
- KAWASAKI ZRX400 -04 *Processing to drill switch holes is required|* Required side cap (for 18mm I.D.)|*Not available for the models after 05 due to interference with the cowl.
- HONDA MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
- HONDA HORNET250 *Need to drill switch hole
- ...ja enemmän.
I reverse engineered it on my XJR1300.I was not satisfied with the position and appearance of the Tommaselli separate handlebar I had previously installed, so I changed to a Pipe Handlebar.This was th...Lue lisää - Clip On Handlebar Steelmennessä HURRICANEsopii:
- KAWASAKI ZEPHYR400χ 97-08 (ZR400C)
- KAWASAKI ZRX400 II 95-08 *Not available with cowl
- KAWASAKI ZEPHYR750 RS 91-07
- KAWASAKI ZEPHYR750 91-07
- SUZUKI INAZUMA400 97-02 (GK7BA)
- ...ja enemmän.
The work takes about one hour.I had it done at the store.Lue lisää - Footpeg Barmennessä HURRICANEsopii:
- HONDA 400X 13-15 NC47
- HONDA CB1000 SF (Big One) 92-98 SC30
- HONDA CB1100 10-21 SC65
- HONDA CB1100 EX 10-21 SC65
- HONDA CB1100 RS 17-21 SC65
- ...ja enemmän.
Is it good that it's so easy to install? It's easy to install.Lue lisää - sopii:
- KAWASAKI ZRX400 -04
- KAWASAKI ZrX1200ZrX1200 DAEG
- KAWASAKI ZRX1200R
- KAWASAKI ZRX1100II
- KAWASAKI ZRX1100
- ...ja enemmän.
When I tried to make a hole without using Hole Guide before, I couldn't make a hole well, but I can make a hole well by using this Hole Guard.Lue lisää
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING