TANAX Peitelevy 9
good quality , but only 1 pcs mirror , need remark purchase 2 unit. fast delivery and nice look. giving good quality item , can purchase with this company trusted 100%
 |  |  |
 | ||
-
| siirtymä | 1339 | Moottorityyppi | - |
| Maksimitehon (ps) | 197PS / 9,500rpm | Maksimi vääntömomentti (kgf / m) | 15.8kgf・m / 7,200rpm |
| Ajoneuvon paino (kuivapaino) | - | Bensatankin tilavuus litra | 21 |
DAYTONA Moottoripyörän kansi SIMPLE LL Koko
I lost my zrx1100 and bought a new one for my z1000. the quality of the cover is worth the price. The quality of the cover is worth the price. My previous cover was over 10,000 and thick.The Cover at the time started to tear after ten years of wear and tear. I felt thin compared to that Cover. I do ...
ZETA Ohjausvivun jarru
The Adjustment Knob is not as easy to operate as the OEM one, but you can easily tilt the Lever forward with one hand and turn it with the other hand with the Glove on. The adjustment knob is harder to operate than the OEM, but you can easily turn it by leaning the lever forward with one hand and th...
YOSHIMURA Öljyntäyttöä Cap Racer Replica
Heat? Anodized deteriorated by heat, and RedAnodized was peeled off in no time.
RC ENGINEERING Kytkinlaakerijärjestelmä
I bought this because I thought it would make Clutch operation a little lighter, but I didn't feel much of an effect in my case.
KIJIMA Kahva lämmitin GH10
I installed it on CRF250L MD38.I couldn't find ThrottleAdapter in the car model information. "Type C. I was able to install it with no problem.The outer diameter of the Grip is the same as the OEM, so it doesn't look out of place at all.It's sure to make your winter rides more fun.
ALCAN hands Musta kuminauha Gamma
Does what it needs to do. I mean it's cheap and holds my hands just fine like the stock waffle grips. If you have a handguard, you have to cut it though. It isn't something like a proper enduro grip with removable covers and all. But for the price, this is hard to beat. Maybe I'll get another pair i...
DAYTONA Moottoripyörän kansi SIMPLE LL Koko
I bought the LLSize, but it is a little too small for my XJ6N with OEM Carrier & Meter visor, and it doesn't cover 30% of the front and rear wheels. it may be fine without Carrier or Visor, but I would have been better off buying the 3L for my XJ6N.
![BRISK Nopea ZC / ZS-pistoke [AR12ZS]](http://img-webike-370429.c.cdn77.org/catalogue/images/49027/d407aaa458b83354f8b16dafffb8ea48_TS.jpg)
BRISK Nopea ZC / ZS-pistoke [AR12ZS]
It is necessary to pay close attention to the installation. This Plug does not have the feeling that Washer is crushed like a domestic new Plug.There seems to be a feeling of tightening up as much as there are posts with screwy content.Apply Thread compound on the screw part and use Torque wrench, 8...
(0.0)
Uusin toiminta
-
カネ joined the group ウェビックGSX1300R ハヤブサ(隼)公式グループ 1 day, 22 hours ago
-
まえすぽ joined the group ウェビックGSX1300R ハヤブサ(隼)公式グループ 2 weeks ago
-
松江氏 joined the group ウェビックGSX1300R ハヤブサ(隼)公式グループ 2 weeks, 2 days ago
-
まさ joined the group ウェビックGSX1300R ハヤブサ(隼)公式グループ 2 weeks, 3 days ago
-
ずんぐりむっくり joined the group ウェビックGSX1300R ハヤブサ(隼)公式グループ 2 weeks, 5 days ago
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING