- sopii:
- KAWASAKI Z1000 (air-cooled) KZ A1
- KAWASAKI Z1000 (air-cooled) KZ A2
- KAWASAKI Z750 (air-cooled) A4
- KAWASAKI Z750 (air-cooled) A5
- KAWASAKI Z750 (air-cooled) D1
- ...ja enemmän.
I tried to install it, but it was a simple installation with double-sided tape from the back, and I managed to install the left one, but it didn't fit tightly at all on the DOREMIRight SideSide cover.Lue lisää - sopii:
- KAWASAKI
I chose to do a Z-style Side cover!It's got an OEM look on the front side!The shape is good, but because the width becomes wide, the footing becomes bad…Lue lisää - sopii:
- KAWASAKI
- KAWASAKI
It's a consumable product, so if it cracks or becomes loose, I replace it. The other day the side cover came close to coming off while driving. It was insufficient inspection.It's a safe and normal us...Lue lisää - sopii:
- SUZUKI
The four hole positions on the screen stay were different.I installed a carbon cover, though, so I could fool you.It was off by more than two centimeters.Isn't the wrong hole location a problem for th...Lue lisää - sopii:
- KAWASAKI Z1000
- KAWASAKI Z1000R
- KAWASAKI Z1000J
- KAWASAKI
- KAWASAKI
- ...ja enemmän.
I decided to change the exterior color of the tank while painting it, so I used Reproduct's Tail Cowl PurchasedIt looks like it was molded from the OEM Product, so the shape and installation was fineI...Lue lisää - sopii:
- KAWASAKI Z1000
- KAWASAKI Z1000R
- KAWASAKI Z1000J
- KAWASAKI
- KAWASAKI
- ...ja enemmän.
I wanted to change the exterior color while painting the tank, so I bought ReproductThe shape is the same as the OEM, no problemThe protruding parts for mounting the car are tighter than the OEM, and ...Lue lisää - sopii:
- KAWASAKI Z1000J
- KAWASAKI Z1000
- KAWASAKI Z1000R
- KAWASAKI
- KAWASAKI
- ...ja enemmän.
I bought it to change the exterior color while painting the tankOEM products are naturally discontinued, so it's great to see Reproduct on the marketSide cover installation only inserts into Grommet, ...Lue lisää - sopii:
- KAWASAKI Z Series Universal
I bought it because I wanted to put Cowl on it The material is very good It is more than hardLue lisää - sopii:
- KAWASAKI
- KAWASAKI
Side cover Grommet'sRubber has deterioratedI bought it as a spareCompared to OEM parts, theGrommet's Rubber was too softIt is easier to remove the side cover lightlyI'm just worried it'll come off in ...Lue lisää - sopii:
- KAWASAKI Z Series Universal
It is not easy to install It is strong It can swing up and down if you use the two-point stopper I made a hole at the bottom of the Cowl and bolted another Bracket to itLue lisää - sopii:
- KAWASAKI
Extremely poor quality. Ordered the Candy Tone Brown for my Z900RS. Received the first one with defects in the orange decal and a noticeable scratch in the candy tone brown. There was also a gritty co...Lue lisää - sopii:
- KAWASAKI Z Series Universal
I bought it to install on my Z1, but the blinker bolt that came with it has been replaced by the current blinker bolt It's not going throughLue lisää - sopii:
- KAWASAKI
It's very easy to install, but you'll lose your luggage hookIt is recommended to use it in conjunction with a BEET short rear fenderI installed it with Mr. KIJIMA's Rear Fender Eliminator Kit and but ...Lue lisää - sopii:
- KAWASAKI Z Series Universal
Cowl, I was worried about the Screen because it is soft in spite of its thickness, so I used the included Besides Bracket, I added 3 more items Cowl is produced as back and forth It seems easy once yo...Lue lisää - sopii:
- KAWASAKI
- KAWASAKI
OEMParts is not used as a result of deterioration, purchased by preventing falling off of Side cover.Soft and Fit feeling is also good.RiproParts should be easy to get out of print. After that I would...Lue lisää - sopii:
- KAWASAKI Z Series Universal
Since Handlebar hit the tip of Cowl, I replaced it with Super Bike Handlebar of DAYTONA, I bought Universal Bracket at home center instead of using the attached Mounting Hardware, and I got a very sat...Lue lisää - sopii:
- KAWASAKI Z Series Universal
I installed it on the SR 400 FI, but I can not go on a regular basis. It was pretty difficult, but I could cleanly install it. Other than that, the price is not high and I am very happy.Lue lisää - sopii:
- KAWASAKI Z750FX 79-80 -I
- KAWASAKI Z1000 MkII 79-80
I bought for mk 2 of pmc, but it is made by DOREMI first. Well that's fine, but only one of the three convexities will fit perfectly, so I think if I run I will fly away. Also the packing of goods...Lue lisää - sopii:
- KAWASAKI
- KAWASAKI Z1-R/Z1-RII
In the description of item, it is written as Gel finish, but if you open the box, it seems like white lacquer paint?. A painter shop is also a word of Hydoy! It was deceived !!It takes time and effort...Lue lisää - sopii:
- HONDA
Purchased on first look good 1. Mesh department changed to Gold.Rear brake reservoir Tank will be rolled out, so we have Cover. It's a nice feeling.Lue lisää
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING