Veden lämpötilan vastaavuus (-19,5 - 99,9 astetta)
[Tuotteen sisältö]
Kompakti lämpömittarin runko x 1kpl.
termistori (R1 / 8-kartioruuvianturi) x 1kpl.
Thermistor-liitäntäkaapeli (Noin 1.000 mm) x 1kpl.
tarranauha (25 mm x 55 mm) x 1kpl.
Varaparistoakku (LR44Type) x 1kpl.
Käyttöohje x 1kpl.
kanssa Noise Cut Filter
* Ei voida käyttää öljyn lämpötilan mittarina.
* Ei taustavaloa, katsella ominaisuuksia.
* Ei ole taustavaloa tai kellotoimintoa.
* Joidenkin malleiden vedenlämpötilan näyttö ei ole vakaa, ellei kohinasuodattimella (63847) on asennettu.
* Huomaa, että käyttökelpoinen termistori (vakiintunut vastusarvo) vaihtelevat tuotteen mukaan.
Termistorin kiristysmomentti (R1 / 8-kartioruuvianturi) on 10-13,5 Nm.
* Jos haluat käyttää termistoria uudelleen (R1 / 8-kartioruuvianturi) , varmista, että käytät uutta tiivistenauhaa.
* Jos tätä tuotetta käytetään lämmitetyissä olosuhteissa, kuten kesäpäivinä, nestekidepaneeli saattaa tulla mustaksi. Näin tapahtuu, kun paneelin lämpötila ylittää sen sallitun alueen, ja se ratkaistaan, jos mittarin rungon lämpötila jäähdytetään.
* Ei tule kohinasuodattimella.
* Käytettävät mallit ovat vedenlämpötilan mittarina käytettäviä. Vaihda tuotteeseen kiinnitetty anturi aitoon anturiin.
* Huomaa, että HONDA HORNET600: n asennuspaikka tulee sylinterinkannen takana.
Water temperature support (-19.5 to 99.9 degrees)
[Product Description]
・Compact balance meter body x 1
・Thermistor (R1/8 taper screw sensor) x 1
・Thermistor joint cable (approx. 1.000mm) x 1
・Velcro (25mm x 55mm) x 1
・Spare button battery (LR44 type) x 1
・User's Manual x 1
With noise cut filter
*Not for use as an oil thermometer.
*No backlight function, no clock function.
*In some vehicles, the water temperature display may not be stable unless a noise cut filter (63487) is installed.
*The thermistor (setting resistance value) that can be used differs depending on the product.
*Tightening torque for thermistor (R1 / 8 taper screw sensor) is 10-13.5N-m.
*When reusing and installing the thermistor (R1 / 8 taper thread sensor), be sure to use a new sealing tape.
*If this product is used under the hot sun in the summer, the LCD panel may turn black.This phenomenon occurs when the temperature of the LCD panel exceeds the allowable temperature, and can be solved by lowering the temperature of the meter itself.
*Compatible models are for use as a water temperature gauge.Replace the sensor supplied with the product with the stock sensor.
*Only HONDA HORNET600 is installed at the rear of the cylinder head.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.