MOTOLED IC-rele
Tuote # D45-69-830
12.47 EUR (2,042 JPY)
Listahinta: 13.44 EUR Tallentaa 7%
+20 Webike kohta (0.12 EUR)
Tuote # D45-69-830
12.47 EUR (2,042 JPY)
Listahinta: 13.44 EUR Tallentaa 7%
+20 Webike kohta (0.12 EUR)
3.8 / 5
58 arvostelut
Fits: HONDA CRM80 , HONDA XR230 , HONDA CRF230F , YAMAHA WR250X , YAMAHA WR250R
[How is it used?
HondaFTR223 (Past)
KawasakiD Tracker (Past)
KawasakiZ400 (Installed this time)
Used in the above 3 car models.
I have purchased three times because I personally felt the quality was good.
FTR223,D Tracker is used with DRC's Blinker, and for this Z400, the Blinker Bulb is replaced with a T10 LED bulb.
All of the above are flickering well as Blinker with no problems.
When I was using the D Tracker, it was used in Race and Off-road driving applications, etc..Large vibration is severe, but this product did not break down.
Was the one you received as per Image?
As per Image. I thought it came with an instruction manual, but the one I received did not have one.
Since there is a lot of information on the Internet, the installation was done without any problems.
Was the installation difficult?
Although there was no instruction manual, I was able to install it on the Z400 without any problems based on the information on the Internet.
However, there is a reason why it can be installed without problems.
The reason for this is that we have a service manual. It is.
Whenever I tinker with electrical components, I make sure to purchase and keep a copy of the Motorcycle Service Manual.
Service manuals always include a circuit diagram, which is useful when tinkering with electrical components.
Again, if you know what color the power and signal lines of Relay are, you can connect them with no problem if you have the service manual.
This installation on the Z400 vehicle was done with a Liang Maintenance loop and InHemp palmock in the location where the OEMBlinker relay was removed.
How was your experience with it?
My experience has always been satisfactory with no problems.
If you are not particular about the manufacturer of the LED-compatible Blinker relay, I think this product is excellent for the Large change cosmetics.
[Included Parts:were they on?
Bullet Type Terminal
[Was there anything that disappointed you?
It did not come with an instruction manual.
Items to buy together
Bullet Type Terminal in Emonetc.
The attached Bullet Type Terminal is not strong enough to recommend its use.
Service manualView Detail
Fits: HONDA CRM80 , HONDA XR230 , HONDA CRF230F , YAMAHA WR250X , YAMAHA WR250R
I installed a LEDICRelay made by MOTO LED and the Blinker did not respond.
The other day, when I installed DRC's LED Fender Eliminator Kit, KITACO's Unbreakable lensMini Blinker on the front and rear of KLX250s, High flasher phenomenon occurred on the blinker. I installed the LEDICRelay made by Moto LED, but the Blinker did not come on.
Are there any other necessary parts that I need to install? Please let me know if you have any knowledge about this. (_ _) mView Detail
Fits: HONDA CRM80 , HONDA XR230 , HONDA CRF230F , YAMAHA WR250X , YAMAHA WR250R
I bought this to use on my WR250F, but I didn't read the instructions carefully and ended up not being able to use it ……
It's a product I didn't have to buy because it worked fine without this ICRelay on the WR.
I don't know when the corresponding vehicle will be available to me, so I'm keeping it just in case, but if I have a friend who wants one, I'll give it to them.
The thing itself is very carefully built and seems to be quite durable, as it is an Off Car Main brand.
View Detail
Fits: HONDA CRM80 , HONDA XR230 , HONDA CRF230F , YAMAHA WR250X , YAMAHA WR250R
After replacing the valve, it was not reacted by SW ON Yellow light upside down, front and back lit up. I think it's defective. And I turned it back on flasher status. Will you replace it?View Detail
Fits: HONDA CRM80 , HONDA XR230 , HONDA CRF230F , YAMAHA WR250X , YAMAHA WR250R
CRF250L mugenSpec. Mounting on.
For the company's LED Blinker back and forth installation, we replaced it.
You can remove the RightShroud and access it, but it took time to install it. (Somehow installed per the original position)
It is necessary to separately purchase a plug-in terminal and a Coupler.
There was a problem with the crimping of the terminal, it did not fit in the Coupler, it started again several times and it became usable. I think that it is good because I could exchange it before the OEM expired.
Position function is OK.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Ilmoitus
Valitse vaihtoehto ennen lisätä koriin.
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.