Exclusive Brembo CNC 2-pottipihde
materiaali : Super kova duralumiini
[Asennettaessa ZEPHYR1100: een]
* Ei sovelleta ZEPHYR1100RS: ään.
* Yksinomainen käyttö Brembo CNC 2 POT -pihdeille.
* Ei voida käyttää 2 POT-paksuutta.
* Käytettäessä tavalliselle levyn roottorille (Φ 240) , 5mm ulkoneman ulkopuolella ei kosketa roottoria. Leikkaa vuorausosa, joka ei kosketa.
* Jos käytät ylimitoitettua levyroottoria (Φ 250) , koko pad koskettaa, eikä sinun tarvitse leikata vuorausta.
* Kuva on vain viitteenä. Valitse haluamasi väri värivalintaruudusta. Kuva sisältää kovaa anodisoitua alumiinituotetta.
* Sen värin rakenne on vain viitteellistä. Lopulliset näkymät voivat vaihdella sen materiaalin tai valmistusmenetelmän mukaan.
* Kovan anodisoituneen alumiinin väri on tummempi kuin värilliset anodisoituneet alumiinit.
Brembo CNC 2 pot calipers only
Duralumin Carbide
[Notes on ZEPHYR1100 installation]
*This product is not compatible with ZEPHYR1100 RS.
*For Brembo CNC 2 pot calipers only.
*Not for use with casting 2 pot calipers.
*Also, if you use it on a stock disc rotor (Φ240), the outer 5mm of the pad will not touch the rotor.
*Please cut the lining of the part that does not touch.
*In addition, by using oversized disc rotors (Φ250), the pads will hit the entire surface, so there is no need to cut the lining in that case.
*Image 1 is an image of color anodizing.
*Image 5 shows the color: Hard anodized aluminum (hard natural).
*Color tones are for reference only.The color of the finished product may vary depending on the conditions of the material and manufacturing method.
*Hard anodized aluminum tends to have a darker color tone than colored anodized aluminum.