EUROTasteen keskikokoinen säiliölaukku
Se hyväksyy pikalukitusjärjestelmän, joka voidaan kiinnittää ja irrottaa helposti ja nopeasti.
Varustettu karttapidikkeellä.
[Asennusesimerkki]
[vaihe 1] Irrota ruuvi, joka kiinnittää polttoainesäiliön korkki ja asenna kiinnitys.
[Vaihe 2] Kiinnitä säiliön kannen kiinnike tukevasti kiinnitykseen.
[Vaihe 3] Säiliölaukku kannakkeeseen, kahva Määrä: Pair (vasemmalle ja oikealle) Päätän, missä ajomatka ei ole esteenä, vaikka se leikkaisi.
[Vaihe 4] Poista säiliöpussi kerran kullekin kiinnikkeelle.
[Menettely 5] Merkitse kiinnikkeen asennusasento.
[Vaihe 6] Säilytyslaukku Irrota sisäpohjan pintamateriaali ja käytä Määrä: Pair (vasemmalle ja oikealle) Aseta levy laatikon yläosaan merkinnällä ja poraa h Φ 8 mm: n reikäporauksella. Käytä puuta sopivan suurikokoisena.
[Vaihe 7] Purista säiliölaukku lautasella ja pidikkeellä, kiristä ruuvilla kiinni, sulje pintaliitos ja suojalevy.
[Vaihe 8] Säiliöpussi Irrota etuselkä ja kiinnitä se takaisin kannattimen viiraan.
[Menettely 9] Kiinnitä laukku MountRingiin ja tarkasta, onko se kunnolla kiinnitetty.
Euro-style medium tank bag
The quick-lock system allows for quick and easy attachment and detachment, and the attached belt allows for shoulder carrying.
Equipped with map holder.
[example of installation]
[Step 1] Remove the bolt securing the fuel tank cap and install the mounting ring.
[Step 2] Securely attach the tank bag bracket to the mounting ring.
[Step 3] Insert the tank bag into the bracket and determine a position that does not interfere with driving when the steering wheel is turned to the left or right.
[Step 4] Removed the bracket and the tank bag.
[Step 5] Mark the mounting position of the bracket.
[Step 6] Remove the hook and loop fastener from the inside bottom of the tank bag and move it to the left and right. Place the plate on the top of the bracket in line with the markings and drill a hole hΦ8mm with a drill.Place a suitable sized piece of wood to work with.
[Step 7] Place the tank bag between the plate and the bracket and tighten with the screws provided, then close the hook and loop fastener to cover the plate.
[Step 8] Remove the tab on the front of the tank bag, tie it to the wire of the bracket and replace it.
[Step 9] Attach the bag to the mounting ring and check that it is properly secured.