OEM-tuotteen materiaali : PlasticScrew tuotettiin Aluminium Billet.
Työstö on CNC-koneistusta tietokoneohjauksella ja tarkkuustarvikkeilla.
Jopa silloin, kun kiinnitetään ja irrotetaan Coin, Edge on vaikea sulkea syvyyden ja tarkkuuden Slit, joten eriyttäminen etsiä ilman pudotusta tekstuuri SimpsonHelmet voidaan tehdä.
Slit teki myös Plus + Minuksen sijasta, joten voit työskennellä mukavasti.
On olemassa 6 tyyppityyppiä, AluminiumPlain ja Anodisoitu käsittely.
Anodisoitu käsittely on punainen alumiini / [Väri] Asia selvä / Musta anodisoitu / kulta alumiinista / OrangeAnodized / Se on sininen alumiini.
【Asennusmenetelmä】
OEM-hartsin ruuvin tapauksessa hartsiruuvi Ruuvi on hieman epämuodostunut, kun se työnnetään tarkkuuden ja tasapainon tasapainosta Fleece-ylimekanismin kanssa, mutta tämän ruuvauslaitteen tapauksessa se on hieman erilainen tunne, koska se on Kulta suku Käytä sitä samalla tavalla.
Kuten aiemmin mainittiin, ruuvi-vuori ei muutu hieman heikentyneeksi puremaksi, se liikkuu hieman asennuksen jälkeen, mutta ei ole mitään ongelmaa sellaisenaan.
Jos olet kiinnostunut Locktiteetcistä. Kiinnittimet ruuveille (Matala lujuus) Käytä, kiitos.
* Asenna ja sulje ruuvin vuori noin 5 - 8 mm. Älä avaa / sulje suojus hetkeksi kiristämisen jälkeen.
* Locktiten oheinen palvelu on nyt päättynyt.
* Coin käyttää periaatteessa suosittelee 1 jeni kolikon. Tämä johtuu siitä, että yhteensopivuus on hyvä saman alumiinin kesken, mutta jos se ei ole käytettävissä, on mahdollista myös 10 jenin kolikko tai 5 jenin kolikko. Huomaa kuitenkin, ettei Coinia Gizalla voida käyttää.
I made this screw from billet aluminum instead of the stock plastic screw.
Computer-controlled CNC machining is used for high-precision products.
Even if you install and remove a helmet by coin, it is hard to damage the edge because of depth and accuracy of slit.
The slit is not minus, but plus, so it is easy to work.
There are 6 types of products, including plain aluminum and anodized aluminum.
Anodizing is available in red anodized / clear / black anodized / gold anodized / orange anodized / blue anodized.
[Installation instructions]
In the case of the stock plastic screw, the thread of the plastic screw is slightly deformed due to the combination of the accuracy and the free stop mechanism, but in the case of this screw, the feeling is a little different because it is metal to metal, but please use it in the same way.
As mentioned earlier, the bite is slightly weakened because the screw thread is not deformed, and it moves a little after installation, but there is no problem even if it remains as it is.
If you are concerned about this, please use a low-strength screw adhesive such as Loctite.
*Apply to the thread 5.8 mm when installing and tighten.Do not open or close the shield for a while after tightening.
*The LockTight attachment service is currently discontinued.
*We recommend using a 1-yen coin as the primary choice.This is because aluminum coins work well together. If you don't have a 1-yen coin, you can also use a 10-yen or 5-yen coin.However, please be aware that coins with ridges cannot be used.