[Tekniset]
Nimellisjännite : DC12V
Ulompi koko : W25.5mm x H30.5mm x D15.5mm (* Ilman protrusioita)
[Tuotteen sisältö]
SPI-110 C1Body x1pc.
Exclusive Harness x1pc.
Erilaiset kaksipuoliset nauhat
Käyttöohje / takuukortti
* Mukana tulevat osat ovat erilaisia riippuen sarjasta.
* Kun liikkuva kytkin on kiinni, merkinnän lisäksi mukana toimitettu vaihde sammuu, mutta se ei ole toimintahäiriö.
* Ajattele turvallisuutta ensin ajaessasi, käytä sitä niin, ettei se ole etunäkökulma.
* Noudata liikennesääntöjä ja ajaa julkisessa käytössä.
* Älä käytä vastetta ilman sytytystulppaa. Kun käytetään resistanssiliitäntää, tapahtuu kohinaa ja pyörimissignaalia ei ehkä syötetä oikein, joten käytä sytytystulpan vastusta.
* Kiinnitä mukana toimitettu kaksipuolinen teippi niin, ettei vesi pääse sisään, koska tämän tuotteen takana on kytkin.
* Kiinnitä se hyvin asennuksen ohjekirjan mukaisesti. Se voi vahingoittaa ja aiheuttaa tulipalon, jos siinä on väärä asennusmenetelmä.
* Tarkista se säännöllisesti, kuten osia tai osia, jotka kuuluvat tämän asennuksen jälkeen.
* Huomaa, että emme ota mitään vastuuta vahingon, kuten hajoamisen tai onnettomuuden, aiheuttamasta tämän tuotteen käytöstä.
* Huomaa, että emme voi ottaa mitään vastuuta desorptiotyöhankkeista ja muut erilaiset kulut nousevat korjauksen aikana.
[Specification]
・Rated voltage: DC12V
・Outer diameter dimension: W25.5mm x H30.5mm x D15.5mm (*excluding protruding parts)
[Components]
・SPI-110 C1 main unit x 1
・Model Specific Harness x 1
・Various double-sided tapes
・Instruction manual
*Components vary by kit.
*When the clutch is depressed while driving, the display shows a gear other than the one in which the clutch is engaged, but this is not a malfunction.
*Prioritize safety while driving and do not be careless in front.
*Please do not use non-resistive spark plugs.If you use a plug without resistance, noise may be generated and the rotation signal may not be input correctly, so please use a spark plug with resistance.
*Please put the attached double-sided tape on the back side of this product to prevent water from entering because there is a switch.
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*After installing this product, periodically inspect it to see if any parts have fallen off.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*All vehicles that have been tested by Protec are stock.There is a possibility that a problem may occur if the vehicle is equipped with aftermarket parts other than stock parts.
*Please refer to the service manual of your motorcycle to confirm the respective wiring before installation.