U-KANAYAn tuotteet ovat entisen GPRiderin Mr. Gold Days Valley ja Inner Commercial Co., Ltd: n yhteistyö. Olemme tarkkuus käsittely hallinnassamme.
Kaikki U-KANAYAn tuotteet on koottu ja tarkastanut JapanFOR JAPAN MODELin erikoistunut henkilökunta, joten voit käyttää sitä luotettavasti.
[Vakiotyyppisen vipun ominaisuudet]
Kevyt muotoilu Lever Bodyin lihan lävistys
Toiminnan tehostaminen muuttamalla KnobDesign of Adjust -mekanismia
Lee Bar End Struktuuri, joka minimoi kontaktin Bar Endin kanssa optimoimalla muodon
[Nimikkeen kuvaus]
Käyttämällä 6061 alumiiniseosta erinomainen erinomainen lujuus ja korroosionkestävyys. Ero edullisesta Billet-vipusta huonoon alumiinimateriaaliin on ilmeinen.
Se on tullut viimeistelyllä korkealuokkaisella tuntemuksella täsmällisellä työstökäsittelyllä.
Vipu 7 väriä XAdjuster 8 väriä, yhteensä 56 erilaista värivaihtoehtoa auttamaan autosi CustomCoordinates.
Se voidaan helposti asentaa yksinkertaisesti vaihtamalla OEM-vipuun Mallista riippuen OEM-osat ohjataan.
OEMLeveriin verrattuna vipu asettuu kohti sinua, joten voimaa on helppo soveltaa. Se on erityisen suositeltava niille, jotka tuntevat Pienen henkilön kädet ja OEMLever etäisyydellä.
Yhden napsautuksen kosketusnäytön avulla voit napsauttaa ja napsauttaa tunnusta. Voit säätää vivun asentoa läheltä jopa 6 tasoon. Leverin kärjessä on säätöleveys noin 30 mm.
Vivun pituus on noin 143 mm. * Liitäntäosa ei sisälly.
Koska olemme ottaneet käyttöön oman johtamisjärjestelmän, voimme nopeasti vastata vahingoittuneiden osien toimitukseen vahingossa sattumalta.
Koska korjausosat ovat myös hienosäätöisiä, vahingoittuneiden osien toimittaminen on myös sileä.
Varmista, että tuote voi muuttaa hintaa tai Spec-arvoa. ilmoittamatta.
Jos kyseessä on ajoneuvo, jossa on OEM-kytkinvivun pidike, voi olla tarpeen käsitellä tai poistaa.
U-KANAYA products are made in collaboration with Hideo Kanaya, a former GP rider, and Uchi Shokai.Precision machining under our control.
All U-KANAYA products are assembled and inspected by our professional staff in Japan, so you can use them with confidence.
[Features of stock type lever]
Light design by removing the meat from the lever body
Improved operability by changing the knob design of the adjustment mechanism
The lever end shape has been optimized to minimize contact with the bar end
[Product Description]
Made of 6061 aluminum alloy with high strength and excellent corrosion resistance.The difference from cheap billet levers made of inferior aluminum is obvious.
The precision full machining process gives it a high quality finish.
With 7 colors of levers and 8 colors of adjusters, 56 colors in total, it will help you coordinate your bike's customization.
It can be easily installed by simply replacing the stock lever.Depending on the model, stock parts may be used.
Compared to the stock lever, the lever is positioned closer to the front, making it easier to apply force.It is especially recommended for those with small hands or those who feel the stock lever is too far away.
The lever position can be adjusted in 6 steps from near to far by the one-touch adjuster with a good click feeling.There is an adjustment range of about 30mm at the end of the lever.
The length of the lever is about 173mm. *Attachment part is not included.
With the original management system, quick supply of the parts is available when you had an accident.
Repair parts are also set up in detail, so the supply of damaged parts is smooth.
Please note that prices and specifications are subject to change without notice.
If your vehicle is equipped with a stock clutch lever holder cover, it may be necessary to modify or remove some parts.