Tyyppi : Ohut tyyppi (malli tyyppi : LB7-SL / venttiilimuoto : H7) Nimellisjännite : DC12V tehon kulutus : 20W Värilämpötila : 6000K Käytettävä LED : CREE Inc. XLamp XP-L-LEDit
Ohut ominaisuus 18 mm venttiilivihjeelle.
* Tämä tuote on 12 DC negatiivinen yhteinen. Varmista, että se on tiukasti kiinni kaapeloinnissa 12 VDC: n teholla. * Älä asenna sitä, koska se ei vastaa monia AC-valaistusta ajoneuvoa pieneen moottorin syrjäyttämiseen. * Negatiivinen yleinen tarkoittaa tyyppiä, jossa ajovalojohdotuksen negatiivinen puoli on yleinen hi-palkkipuolella ja matala-palkkipuolella. Se ei vastaa positiivisen yhteisen ajovalon ajoneuvoa. * Tämä tuote on moottoripyörälle, joten sitä ei voi käyttää nelipyöräiseen ajoneuvoon. * Älä sytytä sitä lähelle paperia tai kangasta tai lähellä syttyvää esinettä. Se voi aiheuttaa tulipalon tai epänormaalin lämmityksen. Älä myöskään sytytä syttyviä suihkeita, ohuempia ja muita. ja lähellä palavaa esinettä tai asioita, jotka saattavat syttyä. * Älä kiinnitä ajovalolle valaistuun tilaan. Se voi aiheuttaa toimintahäiriöitä tai polttaa. * Tämä tuote on vesitiivis, mutta ei täysin vedenpitävä. Rullataan vinyylinauhat tai itseliimautuva nauha tai vedenkestävä hoito tiivistysaineella jne. kun kytkin jättää ohjausyksikön. Varo märkää vettä. * Älä koske korkeapainepesuun suoraan tämän tuotteen aikana autonpesuun korkeapainepesukoneella. * Älä pudota LED-lamppua tai ohjainyksikköä tai anna vahvaa iskua. Se ei vain lyhentäisi elämää vaan myös aiheuttaisi vahinkoa sekä vahinkoja ja suorituskyvyn heikkenemistä. * Asenna asennettava silikonirasva aina LED-polttimoon. Katso lisätietoja tästä käyttöoppaasta. * Älä koske LED-siruun, kun se on päällä tai päällä. * Älä peitä vedenpitävää tuulettimen koteloa. Varmista riittävästi tilaa imuilman virtaamiseksi tuulettimen takaosassa. * Vedenpitävän tuulettimen asennuksen aikana on merkitty orientaatiota. Asenna hopeinen pyöreä tiiviste ulospäin. * Käytä ruuvien lukitusta estääkseen ruuvien löystymisen. Lisäksi kiristä se uudelleen säännöllisesti. * Asennus edellyttää erityistä tietämystä ja taitoa. Tee se pätevän mekaniikan ja ammattitaidon avulla. * Muista säätää optista akselia ennen sen käyttöä. Se vaikeuttaa saapuvan ajoneuvon näkyvyyttä ja saattaa aiheuttaa liikenneonnettomuuksia. tarkempia tietoja on maantieliikenteen ajoneuvon turvallisuusstandardissa. * Joissakin tapauksissa ajoneuvon valmistajan takuu ei ole mahdollista asentamalla tämän tuotteen. * Yhtiö ei ota mitään vastuuta vahingoista, jotka ovat epäonnistuneet ja aiheuttavat onnettomuutta tämän tuotteen käytön seurauksena. Huomaa lisäksi, että yritys ei ota vastuuta desorptiomaksusta ja muista korvauksen aikana syntyvistä kuluista. * Ota yhteyttä jälleenmyyjään tai PROTECH SERVICE DIVISION -ympäristöön, jos havaitset epänormaalia asennusta tai käyttöä.
Type: Slim type (Model: LB7-SL / Valve shape: H7) Rated Voltage: DC12V Power consumption: 20W Color Temperature: 6000K Use LED: CREE XLamp XP-L LEDs
●Slim design with 18mm diameter at the tip of the valve
*This product is only for 12V DC Minus Common.Be sure to use DC12V as the power source for wiring. *Please do not connect to the AC headlight, which is common in small displacement vehicles. *Minus common refers to the type in which the negative side of the headlight wiring is common to both the Hi beam side and Lo beam side.Not compatible with vehicles with positive common headlights. *This product is for motorcycles only, so cannot be used on four-wheeled vehicles. *Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite. *Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns. *This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary. *When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product. *Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury. *Be sure to apply the included silicone grease when assembling the LED bulb.Please refer to this manual for details. *Do not touch the LED chip when it is off or on. *Do not cover up the waterproof cooling fan.Make sure that there is enough space behind the fan for the sucked air to flow. *The waterproof cooling fan has a specific orientation for installation.Be sure to install with the silver round seal facing outward. *Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended. *Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics. *Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair. *If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.
■ Jättämällä tehokkaasti valodiodista syntyvä lämpö, se voidaan aina palaa täydellä teholla! LED on muuntamistehokkuus (Tehokkuus muuntaa syöttöteho näkyvälle valolle [ihmisen silmän näkyvän aallonpituuden sähkömagneettinen aalto] ] Vaikka se on ominaisuus, että se on erittäin hyvä, vaikka syöttöteho on vielä 100%, yli 70% muunnetaan lämpöksi. CYCLONELEDSeries "Solid Aluminium Solid Wood" "Jäähdytyslevy" "Vedenpitävä tuulettimen tuuletin" lämpö kolmen, aina täyden tehovalon yhdistelmällä!
Lämmönvastaiset toimenpiteet ovat välttämättömiä lämpöherkille LEDeille. Jos et voi antaa tämän lämmön menemistä tehokkaasti, et voi laskea Virtaa valaistuksen alusta tai pienentää tehoa puolivälissä. En voi poistaa sitä täyden potentiaalin LED.
■ Kestävät vedenpitävät tuulettimet hyväksyttiin! Cyclone LED-sarjassa olemme myös kiinnittyneet tuulettimiin, joilla on tärkeä rooli suuritehoisten LEDien tuottaman lämmön tehokkaaseen jäähdyttämiseen. Yleisessä elektroniikkalaitteessa käytettävällä tuulettimella on laakeri "Metal support type" Kestävyys on alhainen eikä sitä ole sopii moottoripyöriin. Sykloni-LED-sarjassa se on myös jäähdyttimen jäähdytyspuhallin, vedenpitävä suorituskyky ja erinomainen kestävyys "Kaksiakselinen kuulalaakerointi" Vaikka se näyttääkin pieneltä, se läpäisi myös 2 tunnin maanjäristyksen kestävyys 20G! Se on vain Protech joka ottaa käyttöön vedenpitävän ja kestävän tuuletin LED-polttimolla.
■ Luotettava! Suurin valon voimakkuus helpottaa 15 000 kandelaa, joka on vakioarvo ajoneuvojen tarkastuskriteereille [Väri] Tyhjennä se Suurin valaistus ilmoitetaan liitteenä olevan Japanin ajoneuvon tarkastusyhdistyksen antamassa sertifikaatissa. * Tämä tuote on japanilainen ajoneuvotarkastus, mutta jos se on kiinnitetty ulkoiseen ajovalolaitteeseen, joka ei ole OEM, kuten lika ja pilvi ajovalojen linssin pinnalla huonon optisen akselin säätämisen vuoksi, vanhentunut heikkeneminen, Plating kuorinta heijastimessa lampun sisällä , jne. Olkaa varoitettuja siitä, että se voidaan tuomita hylätyksi ajovalojen tarkastuksen aikana.
■ Pitkä käyttöikä! NORMALin halogeenipoltto ja pidempi käyttöikä kuin HID.
■ Virransäästösuunnittelu! Koska virrankulutus on 30 W H4 / H4 - RType ja 20 W H7 Type, yleinen H4 Halogen Bulb (12V 55 / 60W) Se säästää enemmän.
■ Luotettava CREE-yritys LED-hyväksyntä! Valoantureita varten käytämme CREE XLamp XP-L-LEDejä, jotka ovat kestäviä ja erittäin luotettavia.
■ Hi / Lo-kytkin! H4 / H4 - RTyytettä voidaan Hi / Lo vaihtaa sijoittamalla 3 LEDiä HiBeam ja LoBeam vastaavasti.
■ Helppo asennus! Johdotus on helppo vaihtaa ValveCoupler.
■ Yhtäkkiä kirkas nopeasti valaistu! Toisin kuin HID, täysi teho syttyy välittömästi virran kytkemisen jälkeen, eikä ole mitään seikkaa, että valonläpäisevä väri muuttuu asteittain HID: ksi.
■By efficiently releasing the heat generated by the LED, the LED can always be lit at full power! LEDs are characterized by their extremely high conversion efficiency (the efficiency of converting input power into visible light [electromagnetic waves with wavelengths that can be seen by the human eye]), but even so, if the input power is 100%, more than 70% is converted into heat.The Cyclone LED series uses a combination of solid aluminum, a heat sink, and a waterproof cooling fan to efficiently dissipate heat and enable full power lighting at all times.
Thermal management is essential for heat-sensitive LEDs.If this heat cannot be dissipated efficiently, the power must be reduced from the start of lighting or from the middle of lighting.In other words, if you don't have a good thermal management system, you can't get the full potential of LED.
■Adopts a highly durable waterproof fan! In the Cyclone LED series, Protec also paid attention to the fan which plays an important role in cooling the heat generated by the high power LED efficiently.The fan used for general electronic equipment is not suitable for motorcycles because the bearing of the rotating part is "metal support type" and durability is low.The Cyclone LED series uses a "dual axis ball bearing type" bearing with waterproof performance and excellent durability, which is also used for cooling fans of radiators.It may look small, but it has passed the 20G seismic test for 2 hours!Protech is the only LED bulb for motorcycles that uses a waterproof and durable fan.
■Long life! It has a longer life than H.I.D.
■Power-saving design! Power consumption is 30W for H4 / H4-R type and 20W for H7 type, so it is more energy saving than general H4 halogen bulb (12V 55 / 60W).
■Adoption of reliable CREE LED! Durable and reliable CREE XLamp XP-L LEDs are used for the light emitter.
■Hi / Lo switching! H4 / H4-R type has 3 LEDs for Hi beam and Lo beam respectively and Hi / Lo switching is available.
■Easy to install! It is easy to wire by replacing the valve coupler.
■Bright and quick lighting! Unlike HID, it lights up with full power immediately after power-on.Also, the color of the light does not change gradually like HID.
varovaisuus
* If there may be an instruction manual included, it will be written in Japanese.
I will review it because it has stopped lighting this time. There are many small parts and workability is bad, but it was bright as it was. Since the attached Dust cover can not cover the opening, the one who arranged with Internet based on the removed Waterproof Cover can be relieved. View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!