- Lisätarvikkeet
- Trailer / Hinaus / vinssi
- DRC
- DRC - Trailer / Hinaus / vinssi
- Tuotelista
- Hybridilampun korvausjalka
Hybridilampun korvausjalka
Tuote # D36-41-910
3.16 EUR (518 JPY)
Listahinta: 3.16 EUR Tallentaa 0%
+5 Webike kohta (0.03 EUR)
Tuote # D36-41-910
3.16 EUR (518 JPY)
Listahinta: 3.16 EUR Tallentaa 0%
+5 Webike kohta (0.03 EUR)
4.2 / 5
33 arvostelut
[How is it used?
Hybrid lamp made by DRC, which I think many people who transport Off cars with Transporter use, because it is light and very easy to useMaterial:I don't use AluminumLadder much anymore.
When I use it to some extent, the tip of Rubber is gone before I know it, and I used it as it is, but I noticed that there are Repair Parts and bought it.
Was the one you received as per Image?
The item in the product picture arrived. There was no particular problem in the condition.
How was your experience with it?
It's easy to install as it just goes on. The rattling became proper and returned to the original feeling.
[Points to note]
This part is still easy to take off, and there are people around Off car riders are also missing a lot.
Not only insert the Rubber, but also wrap the inside with Vinyl Tape etc. to fit the Rubber without any gaps, or use the adhesive for Rubber.
How did it compare to other products?
There is no particular product to compare.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the ManufacturerView Detail
Just the right length to load in a light van without folding it up
Ideal for Mini bike
Might the gradient be steeper and harder to pack in a 250ccClass?View Detail
[How is it used?
Step WGN as a new Transporter (RF3) I bought this product because I needed it for loading and unloading my motorcycle. This product comes in three different lengths, and I chose the middle length. I chose the middle length. If it is not long enough, it will rub the motorcycle the moment I put it in the cargo area, as the slope is too steep to load and unload a large motorcycle with a low belly.
Was the one you received as per Image?
As expected of aluminum, it is light. Since it is foldable, it does not take up much space.
The colors are good and casual.
The orange plastic part at the joint interfered with the ladder and prevented it from being straight.
I thought it might be a problem, so I asked someone who was already using it, and he said that it was designed that way, and that it would eventually wear out and straighten out. I wondered if there was a reason for the shape of the Ladder, because some of the other Ladder models have a slightly raised center.
How was your experience with it?
Loading and unloading the off-road vehicle was no problem at all. However, when loading and unloading the PCX, which has a low underbelly, the Under Cowl got stuck and I had to use the Power Play. I wonder if it would have been better to go up a size...
One of the major reasons why I chose this product was because I thought the material used for the part that hooks onto the car body was rubber, which would not scratch the car body. After using it, I can say for sure that it does not scratch. This is good.
[Points to note]
If you have a wallet and cargo space to spare, I would recommend buying the longest one possible. (I have some regrets)
As mentioned above, some Cases may not be exactly straight at first.
The height of the edge next to the Ladder is not very high, so be careful not to break the wheel.
How did it compare to other products?
I have used a non-Aluminum Ladder, but the Aluminum is clearly lighter.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
If you buy a Transporter, you should also buy a Tie Down Belt.View Detail
[How is it used?
I use it to put my Off car on High ace.
I used to use Straight's DRC Lamp, but it was too long and I had trouble storing it, so I replaced it with this foldable one.
Was the one you received as per Image?
As per Image
It feels a little heavier than I was expecting.
How was your experience with it?
It can be folded so that it can be loaded vertically, and of course it fits under the belly of the Motorcycle as shown in the photo, so you can use the space effectively.
It's great because I load three cars or a stupid load.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Rubber of the foot is a Replace product, so buy it when it is gone.
Hybrid Lamp Replacement Foot Rubber (https://www.webike.net/sd/23176446/)View Detail
It is lightweight and has some strength.
The part that hangs over the body of the car is rubberized to prevent scratching. It is easy to use and recommended.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Ilmoitus
Valitse vaihtoehto ennen lisätä koriin.
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.