Tyyppi : HS1
HI / LO Vaihdettava
Nimellisjännite : AC / DC 12V
tehon kulutus : 30W (AC) / 30W (DC)
Värilämpötila : 6000K
sekä AC että DC
Valmistajan takuu on 1 vuosi
Tarkastusliiton arvion mukaan
* Sitä ei voida vaihtaa HONDA FI -ajoneuvoon (GROM, CROSS CUB, SUPER CUB110 / 50 jne.)
* Tämä tuote on tarkoitettu 12V: n tasavirtaan (DC) negatiivinen yhteinen. Varmista, että se on tiukasti kiinni kaapeloinnissa 12 voltin teholla.
* Huomaa, älä asenna sitä, ei vastaa monta vaihtovirtaa (AC) valaistus seremonia ajovalot ajoneuvon pieni ajoneuvon pakojärjestelmä.
* Negatiivinen negatiivinen viittaa siihen tyyppiin, jossa ajovalaisimen johtojen miinuspuoli on yleinen Hi-palkkipuolella ja Lo-palkkipuolella. Se ei vastaa positiivisen yhteisen ajovalon ajoneuvoa.
* Ei ole mahdollista käyttää nelipyöräistä ajoneuvoa, koska tämä tuote on moottoripyörälle.
* Älä sytytä sitä paperin tai kankaan tai syttyvien esineiden läheisyydessä. Se voi aiheuttaa tulipalon tai epänormaalin lämmityksen. Älä myöskään sytytä sytytyslähteitä, ohentimia jne. lähellä palavia esineitä tai asioita, jotka saattavat syttyä. Se ei vastaa ajoneuvoa.
* Älä asenna ajovalolle valaistuun tilaan. Se voi aiheuttaa toimintahäiriöitä tai polttaa.
* Tämä tuote on vesitiivis, mutta se ei ole täysin vedenpitävä. Pyydä rullata vinyylinauhoja itseliimautuvassa nauhassa tai vedenpitävällä käsittelyllä niittien avulla jne. kytkinlaitteesta, joka tulee ohjausyksiköstä. Varo märkää vettä enemmän kuin on tarpeen.
* Älä koske tätä tuotetta suoraan korkeapainepesuun pesua suoritettaessa.
* Älä pudota LED-lampun tai säätimen tai aiheuta vahvaa iskua. Se ei vain vähennä rikkoutumista, heikentää suorituskykyä, lyhentää elämää, mutta myös aiheuttaa vahinkoa.
* Varmista, että mukana toimitettu piin rasva on LED-lampun kokoonpano. Katso lisätietoja tästä käyttöohjeesta.
* Älä kosketa LED-siru, kun se on pois päältä tai kevyt.
* Älä peitä vedenpitävällä tuulettimella. Pidä riittävästi tilaa tuuletusaukon tuulettimen läpi.
* Se on merkitty orientaatiolla asennuksen aikana vedenpitävällä tuulettimella. Asenna hopeinen pyöreä tiiviste ulospäin.
* Käytä ruuvien lukitusta estääkseen ruuvien löystymisen. Tee lisäksi säännöllinen kiristys.
* Se vaatii erityistä tietämystä ja taitoa asennuksen aikana. Ole hyvä ja mene määrätyllä huoltotehtävällä pro mekaanikkoon.
* Varmista, että säädät optisen akselin ennen käyttöä. Se häiritsee tulevien ajoneuvojen näkyvyyttä ja voi aiheuttaa liikenneonnettomuuksia. Tarkempia tietoja on maantieajoneuvojen turvallisuusstandardeissa.
* On olemassa tapaus, ettei ajoneuvon valmistajan takuuta voida hankkia asenntamalla tätä tuotetta.
* Yritys ei ota vastuuta tämän tuotteen käytöstä aiheutuneista vahingoista, kuten toimintahäiriöistä tai onnettomuuksista. Huomaa lisäksi, että yritys ei ota vastuuta desorptiokyvystä ja muista korjauksen aikana syntyvistä kuluista.
* Ota yhteys jälleenmyyjään tai Protech Service Division -yhtiölle, jos sinulla on ongelmia asennuksen tai käytön aikana.
Type: HS1
Hi / Lo switching type
Rated Voltage: AC / DC12V
Power consumption: 30W (AC) / 30W (DC)
Color Temperature: 6000K
For both AC and DC
With inspection association certificate
*This product cannot be used with HONDA Fi vehicles (GROM, CROSS CUB, SUPER CUB 110 / 50, etc.).
*This product is only for 12V DC Minus Common.Be sure to use DC12V as the power source for wiring.
*Please do not connect to the AC headlight, which is common in small displacement vehicles.
*Minus common refers to the type in which the negative side of the headlight wiring is common to both the Hi beam side and Lo beam side.Not compatible with vehicles with positive common headlights.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*Be sure to apply the included silicone grease when assembling the LED bulb.Please refer to this manual for details.
*Do not touch the LED chip when it is off or on.
*Do not cover up the waterproof cooling fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*The waterproof cooling fan has a specific orientation for installation.Be sure to install with the silver round seal facing outward.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.