Lampun muoto : H4 (HI / LO-kytkentä (1-lamppu)
tehon kulutus : 30W
[Koko]
LED-ohjaimen runko : Pituus 53,5 mm, leveys 28,5 mm, paksuus 16 mm
LED Heat Dissipation -hihnan kokoopas : Pituus (Juuresta kärjestä noin 132 mm, paksuus (yksi puoli (1 sarja 3 kpl) Noin 5mm, leveys 9mm
: 38mm, B : 42 mm, C : 81mm
: Koko Yläistuinpinnasta Valve End: iin (Lampun runko)
B : Koko Yläistuinpinnasta Bulb Topiin (Häiriöiden estimointi, kuten lamppuvalon sävy)
[Tuotteen sisältö]
Pakki (1 kpl.)
Käyttöopas
* Polttopistettä ei saa jäljentää eikä optista akselia ole mahdollista muodostaa linssin leikkausvalon ajovalojen mittaukseen.
* On olemassa tapaus, että suurimman valon voimakkuuden keskipistettä ei esiinny Hi-palkkiosassa käytettäessä projektorin tyyppihälytystä.
* On olemassa tapauksia, joissa valovoima-arvo, joka ei vastaa ajoneuvon tarkastustasoa, on harvinaista myös selkeän linssiheijastimen tyypin suhteen, joka koskee erikoisvalonheijastinta pienellä heijastinalueella.
* Olemme vahvistaneet, että olemme tarkistaneet ajoneuvojen tarkastusstandardit monilla testivälineillä, mutta huomaa, ettei 100-prosenttista takuuta voida taata, että jokainen ajoneuvo voi poistaa ajoneuvon tarkastusstandardit.
* Varmista, että nykyisen auton ja ajoneuvon ympäröivän osan väliset häiriöt venttiilin takaosan ja venttiilimallin vaatimustenmukaisuuden välillä tarkistetaan ennen tilaamista.
* Tarkastelemalla lämpöä tislatun hihnan ja valjaiden käsittelyä, vahvista ainakin, voitteko varata A + 15 mm: n tai enemmän marginaalin.
* Varmista, että voit varmistaa B + 10 mm: n tai enemmän marginaalin LED-vikaantumisen ehkäisemiseksi lämpökoriin nähden, koska lamppu lähettää korkeaa lämpöä.
* Venttiilin takaosan läpimitta on tavallista 22 mm, mutta harkitse, että ympäröivä marginaali otetaan huomioon, kun varastointia harkitaan, koska se aiheuttaa korkeaa kuumetta.
* Anna vähintään vähintään 40 mm: n liikkumavaran kuljettajan varastointitilan varmistamisen lisäksi kaapelin käsittelyn marginaalin takia, koska LED-ohjaimen päärungon pystysuuntainen koko ei sisällä johdotusta.
* Säilytä se riittävällä tilalla tilassa, jotta vältetään lämpöongelmat niin paljon kuin mahdollista oheislaitteissa, koska LED-lämpösäteilyhihna tuottaa korkean lämpötilan. (Ohje on vain loppuun, koska pituutta voi muuttaa hieman tuotteen mukaan / tilanne.)
Valve shape: H4 (HI / LO switchable 1 light)
Power consumption: 30W
[Size]
・LED driver main unit dimensions53.5mm (length), 28.5mm (width), 16mm (thickness)
・Approximate dimensions of LED heat dissipation beltLength (from root to tip): approx. 132mm, thickness (3 pcs. per side): approx. 5mm, width: 9mm
・A: 38mm, B: 42mm, C: 81mm
A: Dimensions from upper seat to valve end (valve body dimensions)
B: Dimensions from the upper seating surface to the top of the bulb (guide for interference of the bulb with headlight shades.)
[Set components]
・1 kit
・Instruction Manual
*For lens-cut headlights, it may not be possible to create optical axes due to the lack of reproducible focus and measurement.
*For projector type headlights, the use of the projector type headlights in the hi-beam area may not produce the maximum light intensity focus.
*We have confirmed that our products meet the bike inspection standards on many test bikes, but please understand that we cannot guarantee 100% compliance with the bike inspection standards for all bikes.
*Before ordering, please make sure to check whether or not the rear of the valve interferes with the surrounding parts of the bike and confirm that the valve type is compatible with the bike.
*Please make sure that there is at least A+15mm of space for storage, taking into consideration the routing of heat dissipation belts and harnesses.
*The bulb emits high heat. To prevent LED failure due to heat buildup, please make sure that there is a margin of B+10mm or more.
*The diameter at the rear of the valve is the same as 22mm, but it generates high heat, so please consider leaving enough room around the valve when storing it.
*The vertical dimension of the LED driver does not include the wiring, so please allow at least +40mm of space for the wiring as well as for the storage space of the driver.
*Since the LED heat radiation belt generates high heat, please make sure that there is enough space in the peripheral equipment to avoid heat problems as much as possible.(The length may vary slightly depending on the product and lot conditions, so this is only a rough estimate.)