CB1100RS vuoden 2017 jälkeen / Se on EX-istuin.
Tarkistamme istuimen pinnan kaltevuutta, leveyttä, korkeutta ja muotoa suhteessa OEMSeat-laitteeseen.
Riderin sivu · Sekä matkustajan puolella on sienellä riittävä paksuus ja leveys ja myös istuimen kaltevuus tarkistetaan. Se on suositeltava myös niille, jotka tekevät Tandem-kierrosta, ja kuormien lataaminen on helpompaa Solo-kiertueella.
Koska istuimen leveys on jossain määrin turvattu, jotta ajomukavuutta parannettaisiin ja jalka alas laskettavan osan leveys on kaventunut, jalka on myös hyvä.
Käytä muottiin ruiskutettua Injection-sientä. Koska tyyny on hyvä ja vanhentunut pilaantuminen on pieni, voit holhota sen pitkään.
[Ominaisuudet]
"Seat high"
CB1100RS : 785mm (OEM) ⇒ 795 mm
CB1100EX : 780 mm (OEM) ⇒ 790 mm
· Käytä Tuck Roll of Plain blackLeather istuimella. Stitching Line on Stitch-viimeistely, Linjatyyppi laskee puoliväliin B-tyypin.
· Tandem-vyö on pulttiraja ja standardi.
· Samanlainen kuin OEMSeat-asennus on Key lock -menetelmä.
· OEM Carrier · Voidaan käyttää myös Top-laatikon kanssa.
Sienen kovuus perustuu vakioasetukseen, jonka paino on noin 60 - 80 kg.
This seat is for CB1100RS / EX after 2017.
The slope, width, height and shape of the seat have been reviewed compared with the original seat.
The thickness and width of the sponge is sufficient for both the rider and passenger sides, and the slope of the seat surface has been revised.It is recommended for pillion touring, and for solo touring, it makes it easier to carry luggage.
The width of the seating area is secured to a certain extent to improve the riding comfort, and the width of the area where the legs are lowered is narrowed so that the legs can fit well.
The injection sponge is fired in the mold.The cushioning is good and does not deteriorate over time, so you can use it for a long time.
[Features]
<>
CB1100RS: 785mm (stock) to 795mm
CB1100EX: 780mm (stock) to 790mm
・Plain black leather tack roll on the seat.Sewing lines are stitched, B type where the lines fall down in the middle.
・The pillion belt is bolted on as standard equipment.
・The key lock system is the same as the original seat.
・This product can be used with stock carrier and top box.
The hardness of the sponge is set to the standard for the weight of 60-80kg.