[Tietoja esineistä]
Asiakkailta "GILD designin tapauksessa on neljä kulmaa, eikä kukaan heistä korvaa" Saattaa myös saada mielipiteitä.
Normaalisti, kun älypuhelin putoaa, se putoaa yhdestä neljästä kulmasta kallistuneen suurimman osan ajasta.
Yhteinen "Alumiinikotelo, jossa on saman seinämän paksuus neljällä kulmalla" Putoamisvaurion takia on muodonmuutoksen pelko.
GILD-suunnitteluyritys Case ei ainoastaan 3DCAD: n stressi-analyysiä, vaan myös muotoilu, jota voidaan käyttää ilman muodonmuutoksia, vaikka se putoaa monta kertaa ja korostaa todellista pudotustestiä yhtä paljon kuin mitä tahansa.
"Helppo käyttää, suojata koteloa" Kun se suunnittelee sitä, siitä tulee muoto.
GILD-mallin tapaus ei ole näppärä eikä se ole hieman hankalaa, koska se poistetaan Boltin avulla.
Etusijalla oli kuitenkin "käyttökelpoisuus, joka ei tunne stressiä", "mikä tahansa mahdollisuus, rakenteet, jotka kestävät tulenkestävää kuormaa".
Vaikka GILD designCase on turhauttavaa, haluan suojata iPhonen vähintään 2 vuoden ajan.
[Toiminnan harjoittaminen]
Toistuva prototyyppaus toistuvasti, osa, jossa sormi koskettaa Bumperia, on suunniteltu siten, ettei epämukavuutta ole.
Voit myös käyttää Smipeä usein käytettyyn pyyhintään.
Vaikka se on liitetty iPhone XS MAX -soittimeen, sillä ei ole epämukavuutta, ja sitä on monesti testattu monta kertaa, jotta se olisi helppo pitää.
Kaikki osat kuten LIGHTNINGCable, VolumeButton jne. on suunniteltu niin, että toimintakyky ei ole vaikuttanut.
Suojele herkkä objektiivin pinta niin paljon kuin mahdollista.
Materiaali Boltin löystymisen estämiseksi: RubberO - rengas kiinnitettiin.
Jos asennetaan ruuvilla, löysyys ratkaistaan.
Kaulusboltisarja (myydään erikseen) (Mallinumero: GI-305) Koska Bolt-koko on sama, sitä voidaan käyttää myös iPhone XS MAX -yhteensopivaan koteloon.
iPhone XS MAX kirjeenvaihdon tapauksessa myös hihnan reikä. Vakiovarusteet.
Hihna on kiinnitetty etusivulla vasemmalle, jotta se ei pääse matkalla edes puhelun aikana.
Voit myös laittaa sen Smooth on Pocket.
Kehto (Apple OEM Lightning USB-kaapelin vastaavuus) Jopa iPhone XS MAX on yhteensopiva.
Voidaan käyttää yllään tapauksessa.
[Tietoja Qi: n langattomasta latauslaitteesta]
iPhone XS MAX -yhteensopiva Kiinteä puskurin voi ladata Qi-yhteensopivalla WirelessCharger-laitteella.
Lataus on mahdotonta, kun alumiinipaneeli on asennettu puskurille.
(Lataa OEMLIGHTNINGCable mukana iPhonessa.)
[Tietoja WIFI, 3G, 4G, Bluetooth, GPS, NFCetc.]
Tietoja FaceID: stä → Kasvien lukituksen, lukituksen avaamisen jne. Käyttö. jne. vahvistettiin ja ei ollut mitään ongelmaa.
Tietoja ApplePay-ohjelmasta → Normaalikäytössä ei ole ongelmia.
Tietoja Wifi → Normaalissa käytössä ei ole ongelmia.
Tietoja 3G → Normaalissa käytössä ei ole mitään ongelmaa.
Jos käytät alumiinipaneelia, on radiohäiriöiden vaikutus, mutta 4G: n vastaanotossa ei ole ongelmia.
Noin 4G → Normaalissa käytössä ei ole mitään ongelmia.
Tietoja Bluetoothista → Normaalissa käytössä ei ole ongelmia.
Tietoja GPS → Normaalissa käytössä ei ole ongelmia.
Noin 4X4 MIMO → Emme ole vielä vahvistaneet tilanteessa, jossa Service Inn ei ole FOR JAPAN -mallissa, mutta suunnittelemme antennit-riviä mahdollisimman paljon.
[About the product]
We sometimes get an opinion from a customer that "all of GILD Design's cases have 4 corners and they don't look different from each other".
When a smartphone falls, it usually tilts and falls from one of the four corners.
Commonly used "Aluminum case with same thickness in all four corners" may be deformed by the shock of dropping.
GILD Design's cases are designed with stress analysis by 3D CAD, and above all, actual drop tests are conducted many times to make sure that the case can be used without deformation even if it is dropped many times.
The design of a "case that is easy to use and protects," ended up with that shape.
The GILD Design case is not fancy looking, and is a bit of a hassle since it is bolted on and off.
Even so, we prioritized "stress-free operability" and "a structure that can withstand accidental drops and refraction loads".
We want to protect your iPhone for at least 2 years even if your GILD Design case is falling apart.
[pursuing operability]
We have designed the part where the bumper touches the finger so that there is no uncomfortable feeling.
You can also operate the frequently used swipe smoothly.
We have completed many prototypes to make it easy to hold and comfortable to wear on iPhone XS MAX.
The lightning cable, volume buttons, and all other parts are designed so as not to affect the operability of the device.
Protects the delicate lens surface as much as possible.
A rubber O-ring is included to prevent the bolt from loosening.
Attaching it together with the screw will eliminate looseness.
Collar bolt set (sold separately) (Model no: GI-305) also has the same bolt size, so it can be used for iPhone XS MAX compatible cases.
The iPhone XS MAX case also comes standard with a strap hole.
A strap can be attached to the bottom left of the front so it won't get in the way during calls.
You can put it in your pocket smoothly.
The cradle (Apple stock Lightning USB cable compatible) is also compatible with the iPhone XS MAX.
Can be used without removing the case.
[About Qi compatible wireless chargers]
The Solid Bumper for iPhone XS MAX can be charged with Qi compatible wireless chargers.
Charging is not possible when the aluminum panel is attached to the bumper.
(Please charge with the stock Lightning cable that comes with your iPhone.)
[About WIFI, 3G, 4G, Bluetooth, GPS, NFC]
About FaceID → We have confirmed that there is no problem by registering and unlocking the face.
About ApplePay → No problem in normal use.
About Wifi → There is no problem in normal use.
About 3G ... There is no problem in normal use.
If you install aluminum panel, there will be an effect of radio wave interference, but there is no problem if you are receiving 4G.
About 4G → There is no problem in normal use.
About Bluetooth → There is no problem in normal use.
About GPS → There is no problem in normal use.