Materiaali: 5052 materiaali
Pintakäsittely: Anodisoitu kunkin värin viimeistely
Rengasleveys: 114mm
[Suositus]
Suositeltava Renkaan koko: 120-70-8 (B77) , Tai 120 / 70-8 (B77)
· Suositeltu rengasputki: 3,5-4,0-8
* Normaali varsi, enimmäiskoko, joka voidaan asentaa normaalilla kääntövarrella, mutta 32080 pölytiiviste etuhaarukoille, 4 mm etupoikkipyörät, kuten 36022, 39403 offset-ketjun välikappaleet.
* Vanteen muoto voi olla erilainen oikealle ja vasemmalle, koska se johtuu paljon virheestä, se ei ole vika. Huomaa etukäteen.
* Kun asennat 4.0J: n, rengas häiritsee ketjupäällystä Avaa ketjun suojuksen häiriöosa.
* Venttiilin reiän osalta, rumpujarrun tapauksessa, etu- ja takajarrupalojen puolella Levyjarrun tapauksessa se on etu- ja takaratas.
* Kuvan väri: hopea.
Material: A5052 material
Surface Preparation: Each color anodized aluminum finish
Rim Width: 114mm
[Recommended]
・Recommended tire size: 120-70-8 (B77), or 120 / 70-8 (B77)
・Recommended tire tube: 3.5-4.0-8
*This is the maximum size that can be installed on a stock stem and stock swingarm.However, you need 32080 dust seal for front fork, 4mm front offset sprocket such as 36022, 39403 offset sprocket spacer.
*The shape of the rim may differ from left to right.This is due to lot error and is not a defect.
*When the 4.0J is installed, the tire interferes with the chain cover.Shave the interfering parts of the chain cover.
*The valve hole is on the brake panel side for both front and rear drum brakes.In the case of disc brakes, both front and rear brakes are on the sprocket side.
*The image shows color: Silver.