• Voitele se erikseen.
• Sisäänrakennettu Main Jet # 230 Pilot Jet # 30
[Tuotteen sisältö]
• VM Φ20 kaasuttimen kokoonpano x1kpl.
• Main Jet (MIKUNI kuusikulmainen tyyppi / suuri) # 220 x1kpl.
• Main Jet (MIKUNI pyöreä tyyppi / suuri) # 240 x1kpl.
• Kaasun apukaapeli x1kpl.
• Jakosarja x1kpl.
• 5 mm: n L-tyypin avain
• 6 mm: n L-tyypin avain
• Kannen pultti 6 x 20 x 4 kpl.
• Kannen pultti 8 x 25 x 2 kpl.
• Jakotukki (öljynipalla L-tyyppi / suuri)
* Se edellyttää jet-tyyppien määrittämistä moottorin ja ratsastusympäristön eritelmien mukaan. Varmista, että käytät OEM-tuotteita asettamalla, koska KITACO Big Carburetor -sarja on hyväksynyt kaikki kaasuttimen valmistajan OEM-osat. Se voi aiheuttaa ongelmia ja oikea asetus ei tule ulos, jos se käyttää muuta kuin OEM-laitetta.
* STD-ilmanpuhdistinta ei voi käyttää.
* Huomaa, että tuote-eritelmä voi muuttua valmistajan syistä.
・Separate lubrication is possible
・Main jet #230 Pilot jet #30 pre-installed
[Kit Contents]
・VM Φ20 Carburetor ASSY. x 1
・Main jet (Mikuni hexagon type/Large) #220 x 1
・Main jet (Mikuni round/large) #240 x 1
・Throttle sub cable x 1
・Manifold Set x 1
・5mm L-shaped wrench
・6mm L-shaped wrench
・Cap bolt 6 x 20 x 4
・Cap bolt 8 x 25 x 2
・Manifold body (with L-shaped oil nipple/large)
*Jets need to be set according to the engine specifications and driving environment.The Kitaco Big Carburetor Kit uses the stock kit from the carburetor manufacturer, so please be sure to use the stock kit for setting.If you use other than the stock one, the correct setting will not be obtained and it may cause trouble.
*Stock air cleaner cannot be used.
*There may be changes in product specifications due to the manufacturer's reasons.