Monkey-tyyppiselle vaakamoottorille
Työkalut 8 tyyppiä
säilytyskotelolla (kotelon väri : Harmaa)
[Tuotteen sisältö]
Kytkimen jousikompressorityökalut
Venttiilikompressorityökalut
Fly Wheel Puller
Yleisvetolaite
Kytkimen pidikkeen kynsityyppi
Lukitse mutteriväännin
Läpiviennin säätönäppäinsarja
Vierintää estävä vaihdepidike (GROM / APE / MONKEY)
[Tuotetiedot]
Kytkimen jousikompressorityökalut
• Vastaava hihnapyörän koko 125-155mm
Venttiilikompressorityökalut
• Puristimen kapasiteetti 130 mm
• Syvyyden koko 100 mm
• Kiinnitysosa 30-28,5, 25-23,5, 23-21,5, 19-16,5, 16-14,5 mm
• Jatkopultti pitkä 90mm, lyhyt50mm
Fly Wheel Puller Tools 6-tyyppinen kirjeenvaihto
• M27 x P1,00 (Kierteinen ruuvi)
• M16 x P1.50 (Normaali kierteinen ruuvi)
• M14 x P1.50 (Normaali kierteinen ruuvi)
• M18 x P1.50 (Normaali kierteinen ruuvi)
• M24 x P1,00 (Normaali kierteinen ruuvi)
Yleinen vetoteline
• Vastaava ulkohalkaisija Φ75-125mm
Kytkimen pidikkeen kynsityyppi
• Kokonaispituus 360 mm
• Aukon leveys 75-125 mm
• Kynnen pituus 30 mm
Lukitse mutteriväännin
• 20 mm x 24 mm
• Sisähalkaisija Φ20,5mm x Ulkohalkaisija Φ25mm, Kynnen leveys 4,8 mm x Kynnen korkeus 5 mm
• Sisähalkaisija Φ24,5 mm x ulkohalkaisija Φ30 mm, kynnen leveys 5 mm x kynnen korkeus5 mm
• Asennuskulma 3/8 " (9,5)
• Kokonaispituus 60mm
Läpiviennin säätöavain
• Mutteriavain M9
• Tappetin säätöavaimen hylsy □ Koko 3,3 mm
Vierintää estävä vaihdepidike (GROM / APE / MONKEY)
• Vaihteiston koko 2,5 mm
*HUOMAUTUS : Sitä ei voi käyttää moottoreissa, joissa on kenno, kuten FI Monkey, Magna 50, Super Cub jne.
* Tämä on joukko työkaluja Honda Monkeys- ja Gorilla-työkaluille. Saatat tarvita eksklusiivisen työkalun 6V ajoneuvoihin, Dax, Chaly, Cub, Magna 50 jne.
* Huomaa, että tuotetietoja voidaan muuttaa valmistajan syystä.
For monkey type horizontal engine only
8 types of tools
In a storage case (case color:Gray)
[Components]
Clutch Spring Compression Tool
Valve Compressor Tool
Fly Wheel Puller
Universal Pulley Holder
Clutch Holder Fook-Type
Lock Nut Wrench
Tappet clearance adjustment wrench set
Anti-Rolling Gear Holder (for Grom/Ape/Monkey)
[Product Specifications]
Clutch Spring Compression Tool
・Compatible pulley size 125-155mm
Valve Compressor Tool
・Clamping capacity 130mm
・Depth size 100mm
・Attachment 30-28.5, 25-23.5, 23-21.5, 19-16.5, 16-14.5mm
・Extension bolt 90mm long, 50mm short
Compatible with 6 types of flywheel puller tools
・M27 x P1.00 (Left-handed screw)
・M16 x P1.50 (Right-handed screw)
・M14 x P1.50 (Right-handed screw)
・M18 x P1.50 (Right-handed screw)
・M24 x P1.00 (Right-handed screw)
Universal Pulley Holder
・Applicable outer diameter Φ75-125mm
Clutch Holder Fook-Type
・Total length 360mm
・Aperture width 75-125mm
・Claw length 30mm
Lock Nut Wrench
・20mm x 24mm
・Inner diameter Φ20.5mm x outer diameter Φ25mm, claw width 4.8mm x claw height 5mm
・Inner diameter Φ24.5mm x outer diameter Φ30mm, claw width 5mm x claw height 5mm
・Insertion angle 3/8" (9.5mm)
・Total length 60mm
Tappet clearance adjustment wrench
・Nut wrench M9
・Tappet adjustment wrench socket □Size 3.3mm
Anti-Rolling Gear Holder (for Grom/Ape/Monkey)
・Gear size 2.5mm
*Note: Engines with cells such as FI Monkey, Magna 50, Super Cub cannot be used.
*Set of tools for Honda Monkey and Gorilla tools.Special tools may be required for 6V bikes, Dax, Chaly, Cub, Magna 50s.
*There may be changes in product specifications due to the manufacturer's reasons.