* Huomaa, että tuotteen tekniset tiedot voivat muuttua valmistajan mukavuuden vuoksi. Huomaa, että tuotetiedot voivat muuttua valmistajan mukavuuden vuoksi. * Tekniset tiedot voivat muuttua valmistajan mukavuuden vuoksi.. Huomaa, että tuotetietoja voidaan muuttaa valmistajan mukavuuden vuoksi.
[Asennus]
* Akseli on tärkeä osa. Asennuksen saa suorittaa pätevä henkilöstö ammattikaupassa.
Tee se käyttämällä sopivaa työkalua, joka sopii akselin pään muotoon.
Se naarmuuntuu akselipinnalle levitetyllä pinnoitekalvolla aiheuttaen ruostetta, jos kiristät väärällä työkalulla.
Ruiskuta rasvaa akselin pinnalle ennen asennusta.
Se ei yleensä aiheuta ruostetta itse akselilta, koska se levittää alkuperäisen KOODin "kolmikerroksista pinnoitusprosessia" akselin pinnalle. Se johtuu metallipotentiaalierosta, estääkseen ruostumisen pyörän laakereista jne.
Huomioi valmistajan ilmoittamat kiristysmomentin arvot.
Vahvista mutteri ajoneuvoille, jotka asennetaan OEM-mutterilla.
Varmista, että käytät uutta mutteria, kun se näkyy mutterissa, kuten putoamisen aiheuttamat naarmut ja itselukittuva toiminto. Tämä estää akselin kierteitetyn osan vahingoittumisen.
[Tuotteen laadusta]
Tuotehallinnan osalta se valmistaa ja hallinnoi täydellistä järjestelmää, mutta ota meihin yhteyttä ennen töitä, jos sinulla on sattumalta ongelmia.
* Emme missään olosuhteissa ole vastuussa vaatimuksista tai tuotteen palauttamisesta asennuksen jälkeen (esim. pujottamalla pyörä akselilla).
Tietoja ruosteesta
KOOD-akselit pinnoitetaan kolmella kerroksella. Normaaliin pinnoitusprosessiin verrattuna KOOD-akseleilla on vahvempi pinnoite. Käyttöolosuhteista riippuen ruostetta voi esiintyä, mutta se ei vaikuta tuotteen laatuun.
* Tärkeimmät syyt ruosteen kehitykseen
Ulkopuolen ruoste voidaan siirtää pinnoitetulle pinnalle.
Pinnoitetun kalvon vaurioituminen: työkalujen virheellinen käyttö, välipaloja tai putoamisia ajon aikana jne.
* Huomaa, että takuu ei kata ruostetta. Huomaa, että takuu ei kata tätä.
[Material] Chromoly steel (3-layer plating finish)
Without plating nut
*There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.