Täysin uusi muotoilu
Tässä se on, helpompi kiristää !.
Laipan mukana toimitettu pultti sisältyy myös laipan kiinnittämiseen, mutta mukauttamalla se Titaniumium-pulttiin, jolla on hyvä lämmönjohtavuus, suorituskykyä parannetaan edelleen !.
Tiiviste (M3670) mukana Määrä: 1kpl. mukana ..
Voit lisätä 2 tai 3 lisää arkkia paremman vaikutuksen saavuttamiseksi.. (* Kehyksestä riippuen 1-2 arkkia voi olla raja.. )
Käytä tällaisissa tapauksissa BORE-ACE -tuotteita.. ]
1: Kaasutin on yhteydessä kehykseen.
2: Kaasutin on kiinnitetty kulmaan
3: Jakotukki on taipunut.
4: kaasuttimen puuttuminen
5: Korvasin sen korkean suorituskyvyn kaasuttimeen, eikä paljon ole muuttunut.
[Erilaisia sovittimia]
Negatiivisen paineen sovitin
Jos käytät BORE-ACEManifoldia, menetät alipaineen uuttamisen.
NORMALGas-kukko pystyy juoksemaan vain PRI-asennossa (Varaus ei toimi)
Jopa NORMAL-kaasuhanan on poistettava alipaine, jotta se voi vaihtaa.
Alipainesovittimen tarkoituksena on tuottaa alipainetta.
Tätä tuotetta ei ole tarkoitettu käynnistykseen.
Säilytystyökalu
Se on ellipticalAdapterin evoluutio VERSIO.
Seos syötetään moottoriin suuremmalla nopeudella.
Completely new design
It is easier to tighten.
The bolts are included in the kit, but you can use titanium bolts for better heat conduction.
One gasket (M3670) is included in the kit.
You can add 2 or 3 more sheets to make it more effective.(*Depending on the frame, 1-2 sheets may be the limit.)
[Please use BORE-ACE products in such cases.]
1: Carburetor is in contact with the frame
2: Carburetor is attached at an angle
3: Manifold is bent
4: Carburetor dropout
5: When you can't find any difference after installation of high-performance carburetor
[Various adapters]
■Negative pressure adapter
If you use the BORE-ACE manifold, you will not be able to extract the negative pressure.
The stock gas cock can only be run in the PRI position (the reservoir will not work)
It is necessary to take out the negative pressure so that it can be switched with the stock gas cock.
The purpose of the negative pressure adapter is to obtain the negative pressure.
This product is not designed to increase power.
■Intake Assist
It is an advanced version of the elliptic adapter.
The mixture is fed into the engine with a higher velocity.