* Yksityiskohdat
Tämän tuotteen mukana toimitetaan mittarikiinnike ja alakiinnitys, jotka voidaan sijoittaa OEMSpeedometrin viereen, jolloin OEM-osien muokkaus ja johdotus eivät ole tarpeen.. Voin asentaa sen ..
Johdotus voidaan yhdistää Couplet-onilla.
Mittarikiinnike on materiaali: Teräs mustalla maalilla
934; 48 pieni DN-kierroslukumittari (DN = digitaalinen neula)
Osoittimen kulmaa ohjataan täysin digitaalisignaaleilla ja Pienikokoisella moottorilla, joka tarjoaa korkean osoittimen pidon ja erinomaisen luotettavuuden.
RPM-toiminnon lisäksi MeterBody sisältää myös lämpömittarin, kellon, EngineWorkTimerin ja automaattisen mittauksen (max.. Lämpötila. ennätys / maks. rpm) ..
Musta paneeli ja oranssi LED-valaistus ovat erinomaisia yöaikaan.
Ruostumaton runko.
Kuminen kiinnitystyyppi
934; 48 Pieni DN-kierroslukumittari Tiedot
Sähköinen kierroslukumittari: -16000 rpm
Monitorilla on useita toimintoja (Digitaalinen näyttö)
Lämpömittari (voi mitata jopa 120 astetta) Mukana on tikku-lämpötila-anturi, joten voit mitata tyhjennyspultin lämpötilaa ostamalla SP Takegawa Drain -pultin (myydään erikseen) ..
Voit mitata ulkoilman lämpötilaa asettamalla lämpötila-anturin kopaan.
Automaattinen mittaustoiminto
Maksimilämpötila- ja nopeustiedot tallennetaan automaattisesti, kun mittari on asennettu.
Ajon jälkeen voit tarkistaa tietueen vaihtamalla mittarin näyttöä, ja tietue tallennetaan, kunnes suoritat nollauksen.
· EngineWorkTimer
Ajastin, joka lisää moottorin käyttöajan automaattisesti yli 500 r / min.
Se pysähtyy, kun se menee alle 500 kierrosta minuutissa.
Suurin sallittu aika: 9999 tuntia (Jopa 100 tuntia tallennetaan minuutteina, yli 100 tuntia tallennetaan tunteina.. Nollattava. Piilotetuilla asetuksilla
Kohdeetäisyyden asetusalue (10 m yksikköä)
24 tunnin näyttö, ei-näyttöasetus
■Details
This product comes with a meter bracket that can be placed next to the stock speedometer and a sub-harness specially designed for the vehicle, so that the small DN tachometer (orange LED) can be installed on the Monkey 125 without the need to modify the stock parts or wiring.
The wiring can be connected by coupler.
Meter bracket is made of steel with black paint finish
■Φ48 Small DN Tachometer (DN=Digital Needle)
The angle of the pointer is completely controlled by digital signals and a small motor, resulting in high pointer retention and excellent reliability.
In addition to the RPM function, the meter is equipped with a thermometer, a clock, an engine work timer, and an automatic measurement function (maximum temperature record / maximum RPM record).
The black panel with orange LED lighting is very easy to recognize at night.
Stainless steel body.
Rubber mount type bracket included
■Φ48 Small DN Tachometer Details
・Electric tachometer with pointer: -16000rpm display
・The monitor is equipped with a variety of functions (digital display)
A thermometer (capable of measuring up to 120°C) and a stick temperature sensor are included, so you can measure the temperature at the drain bolt by purchasing SP Takegawa Drain Bolt (sold separately).
The temperature sensor can be mounted inside the cowl to measure the outside air temperature.
・Automatic measurement function
The maximum temperature record and the maximum rpm record are done automatically when the meter is installed.
After running, you can check the record by switching the meter display, and the record will be saved until resetting.
・Engine work timer
Timer that automatically adds up the engine operating time above 500rpm.
It stops when the speed drops below 500rpm.
Maximum time: 9999 hours (up to 100 hours is recorded in minutes, and over 100 hours is recorded in hours.Resettable.There is a non-display setting
・Clock
24-hour display with hide setting