Alkuperämaa: Kiina
Tuottaja: KEPSPEED
* Se vaatii jonkinlaista käsittelyä FI: n liittämiseen (Polttoaineen ruiskutuskone) Monkey, koska generaattorin kannen muoto on erilainen.
[Asennus]
* On tarpeen irrottaa generaattorin kannen osa asennetusta moottorista, koska tämä tuote liikuttaa käyttöketjupotkua suuresti ulospäin.
* Se vaatii jonkinlaista käsittelyä FI: n liittämiseen (Polttoaineen ruiskutuskone) Monkey, koska generaattorin kannen muoto on erilainen.
*Vakiopoikkeama-arvot ovat 26,5 m ja 18,5 mm. Muiden offset-arvojen asettamiseksi akselin välikappaletta on muutettava.
*KEPSPEED ei tarjoa koneistusta muun kuin vakiosiirtymän arvon asettamiseksi.
* Se on käyttökelpoinen, vaikka se olisi kiinnitetty kolmessa paikassa, mutta älä käsittele suojalevyä. On olemassa tyyppejä, jotka voidaan kiinnittää vain 3 paikkaa lukuun ottamatta suojuksen alhaalla olevaa puolta, jossa on kiinalaisia moottoreita.
* Ole huolellisesti koota ohjeiden mukaan. Asennusohjeet (Complete Kit) on kiinnitetty. Huoltotöiden kunnonvalmistusmenetelmää ei kuitenkaan mainita käsikirjassa.
* Ole valmis kokoontumaan, jos se kokenut moottoripyörän huoltoa.
* Varmista, että onko epänormaalia kosketuspistettä, vaikka takajousitus on kokonaan alhaalla.
* On mahdollista, että kunkin tuotteen yksityiskohtaisessa osassa on pieni muutos. On kohta, joka eroaa hieman johdantokuvasta, mutta annan etusijan varsinaiseen asiaan, joten ymmärrä, kiitos.
* Etsimme moottoripyörien huoltoteknikkoa suorittamaan kokoonpanotyöt moottoripyörien huoltoasiantuntijoista.
*Huomaa tapaus, jota kutsutaan alkulöystymiseksi" matkan alkamisen jälkeen
[Tietoja valmistajan takuusta]
* On olemassa tapauksia, joissa pienet naarmut esiintyvät kuljetusongelman vuoksi.
* Valmistajan takuu ei koske vikoja, jotka heikentävät merkittävästi tuotteen arvoa tai toimintaa.
* Huomaa, että EI PALAUTE, VAIHTOEHDOT JA PERUUTTAMINEN tuotteesta tilauksen jälkeen.
* Lisäksi ratsastuksen alkamisen jälkeiset ongelmat johtuvat usein epätasapainosta ajotilanteen, huoltotilanteen tai ruumiin kunnon kanssa, ja sitä pidetään kaiken vastuuvapauden myöntämisenä, koska sitä on vaikea erottaa yksittäisen tuotteen syistä.
*Laakeri on osanumero 6001ZZ (sinetöity molemmilta puolilta) , mutta varaosia ei ole saatavilla.
* Huomaa, että tuote-eritelmä voi muuttua valmistajan syistä.
*Koska tämä tuote on valmistettu ulkomailla, muovaus, hitsaus, maalaus jne. saattaa olla puutteellinen. Lisäksi saattaa esiintyä pieniä naarmuja ja kulumia kuljetusongelmien vuoksi.
Country of origin :China
Manufacturer: KEPSPEED
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*It is difficult to install it on the fuel injection vehicle (FI) MONKEY because the shape of the generator cover is different.A lot of work is required.
[About the installation]
*Because the drive sprocket of this product moves outward greatly, it is necessary to cut off a part of the generator cover of the engine to be installed.
*It is difficult to install it on the fuel injection vehicle (FI) MONKEY because the shape of the generator cover is different.A lot of work is required.
*The standard offset values are 26.5m and 18.5mm.To set other offset values, the shaft spacer must be modified.
*KEPSPEED does not offer any machining to set an offset other than the standard offset value.
*On some engines made in China, the protector can only be fixed in three places except for the lower rear part.In such a case, the protector plate can be fixed in three places, but please do not modify the protector plate.
※Instructions for assembly (for complete kits) are included.Please refer to the instruction manual and assemble carefully.However, common sense techniques for maintenance work are not described in the manual.
*Please make sure that the person with experience in motorcycle maintenance performs the assembly work.
*Even if the rear suspension is at full bottom, make sure to check for any abnormal contact points before riding.
※There may be some minor specification changes for each product.There may be some points that differ slightly from the introduction image.
*Please have assembly work done in a specialist shop regarding motorcycle maintenance.
※After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
※Some minor scratches and scuffs may occur due to transportation issues.
※GM-MOTO does not accept returns for any reason after the product has been installed.
*In addition, problems after the start of riding are often caused by riding conditions, maintenance conditions, or a mismatch with the condition of the vehicle, and are difficult to distinguish from the causes of individual products. Therefore, all will be disclaimed.
*The bearing is part number 6001ZZ (sealed on both sides), but there are no replacement parts available.
*There may be changes in product specifications due to the manufacturer's reasons.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.