STD-sylinterin päätä varten
jossa pääharjoitus # 150 Pilot Jet # 15
On mahdollista käyttää STD Air Cleaner (Se edellyttää käsittelyä.)
[Tuotteen sisältö]
MIKUNI VM26-671 kaasuttimen kokoonpano x 1kpl.
Manifold Set x 1kpl.
Korkkiruuvi 6 x 15 x 2kpl.
Korkkiruuvi 6 x 30 x 2kpl.
Jakopään runko x 1kpl.
Jakotukipakkaus x 2kpl.
Ruostumatonta terästä (Φ32-50) x 1kpl.
Kumipäällyste x 1kpl.
Main jet (MIKUNI kuusikulmainen tyyppi / suuri)
varovaisuus : Vesisuihkun osia on säädettävä moottorin eritelmän tai ajo-olosuhteiden mukaan.
* Koska KITACO Big Carburetor Kit käyttää alkuperäisiä kaasuttimen valmistajia, varmista, että käytät alkuperäisiä osia. Jos muita osia käytetään, sinulla ei voi olla oikeaa asetusta ja sillä on ongelmia.
* Valmistajan tiedot.
tehokasta saantipotentiaalia!
Tyyppi:
varastosylinterin päätä
Kuvaus:
vmΦ26 kaasuttimen moottoriin.
■ Isompi porausylinterin isompi imuputki.
Huomautus:
■ m / j # 150 p / j # 15 koottu
■ varastossa ilmansuodatin käyttökelpoinen (vaaditut modit)
■ valinnainen tehosuodatinpakkaus
515-4021700 6 000
For stock cylinder head
○Main jet #150 Pilot jet #15 Assembled
○Stock air cleaner can be installed (modification required)
[Kit Contents]
Mikuni VM26-671 Carburetor Assy x 1
Manifold Set x 1
Cap Bolt 6 x 15 x 2
Cap Bolt 6 x 30 x 2
Manifold Body x 1
Manifold Packing x 2
Stainless Steel Band (Φ32?50) x 1
Rubber Holder x 1
Main jet (Mikuni hexagonal type / large)
Note: It is necessary to set up the jets according to the specification of the engine and the driving environment.The Kitaco Big Carburetor Kit uses the stock kit from the carburetor manufacturer, so please be sure to use the stock kit for setting.If you use other than the stock one, the correct setting will not be obtained and it may cause trouble.