Due to maintenance this bearing needed replacing. Rather than go for aftermarket ones, we went for the genuine Honda one. No point in messing around for poor fitment. The correct bearing was found using the help tools on Webike pages. The cost of the bearing was really good value. Better than I thought if I am honest. The old one was failing and causing movement which is bad news for the engine, this was only going to get worse over time. With a few other parts shipped together by EMS all arrived at my door in 5 days. Very well packaged and in perfect condition, Having already removed the old bearing, it was clear that this was going to fail completely very soon. The new one now fitted is silky smooth. The bearing was super clean when unpacked and now the engine runs a little better. No complaints from me on that score. Fitting bearings you do need to take a little care especilly when they are engine based. Take your time and if you are not confident to fit, then seek professional help. Luckily, I have a lot of tools to help with this and to get them fitted perfectly. The wheel now does not sound and feel like it is on a tractor lol Thanks for the help Webike, great work.View Detail

This bike was one aof my friends that had some issues. The main issue is the deterioration of the boot connecting the carb. Over time these do have a tendancy to crack and disintegrate. This is an older bike and I think this has never been changed. I found the right one using Webike help tools etc. The cost was really good and added with a few other parts the shipping was also really good value. Delivered to me in 5 days. Everything was packed well, no damage was sustained to anything in my order.The insulator is a rigid material and looks like it will stand the test of time for a fair few years to come. All the clamps I already had for it are in good condition and once fitted, the difference is astounding. Very pleased with the result and runs like a new bike now. thanks Webike for providing an epic serviceView Detail

About quality and texture: I am happy with the quality of the clutch cable receiver from Honda, a simple yet strong design made from steel.About the feeling of use: I am wishing to customise a clutch cable receiver and the Honda one is the perfect option , it's great that the Honda replacement parts are so readily available for jobs like this.Products to buy together: Replacement brackets for the oxygen and oil temperature sensors would also be desirable to purchase alongside the clutch cable receiver for more customisation of parts.Difficulty of installation: The process to install takes 20 minutes, releasing of the clutch cable and removal of the one crankcase bolt is needed to be able to swap over the clutch cable receiver. Not difficult to do.Cost performance and comparison with other products: Great costing as you are getting Honda quality for a low price, much cheaper than the machine aluminium aftermarket options available.About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: The Webike OEM parts section will be most helpful for sourcing other parts needed for your repairs.View Detail

About quality and texture: I am happy with the quality of the dowel pin from Honda, made from steel and measuring 8mm in diameter by 12mm in length.About the feeling of use: During the replacement of my clutch cover the original dowel pins were distorted and making fitment of the cover difficult, it's great that the Honda replacement parts are so readily available to rectify issues like this.Products to buy together: A replacement right crankcase gasket would also be desirable to purchase alongside the dowel pin for assembly of the clutch cover.Difficulty of installation: The process to install takes half an hour, removal of the clutch cover is needed for access and then just simply swap out the two dowel pins. Not difficult to do.Cost performance and comparison with other products: Great costing as you are getting Honda quality for a low price but the ones available from K-Pit are only slightly more expensive and in stock ready to ship.About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: The Webike OEM parts section will be most helpful for sourcing other parts needed for your repairs.View Detail

Good fuel and vent line for the money. stays pliable even after a couple of years,Needed some fuel line that is meant to actually fit powersports. It does its job well. Been on bike for a few years now and still working.Great product Always impressed with webike products. Good value and delivered fastView Detail

I've used a few variations of throttle assist grips over the years and so far this has been my personal favorite. The full palm grip doesn't make a huge difference but it gives you a bit more feel than some of the smaller surface area grips out there.They all work but for a few extra bucks I personally prefer having more surface area under my hand to work with to control my throttle.This little price of plastic has made long trips a helluva lot less taxing on my wrist and the occasional numbness is pretty much gone. You just let your hand rest on it and it keeps the throttle where you need it.DO take your time getting the angle on this thing EXACTLY where you want it and ride it around a parking lot a few times before you get out into traffic. I almost pitched my bike up into a wheelie the first time I tried it out. You want it angled just slightly up from where your hand rests on the handlebars.View Detail

Nice set of hardware to have around while making repairs.Having one of these bolt kits on hand in your shop, garage, and on long weekends is a necessity. This is a must have when your racing at the track. Never know when your going to loose a bolt or get into a crash and loose one.Bolts and nuts can vibrate off, you can strip the heads, etc. Having these on hand makes replacing them a non issue.This kit is reasonably priced. Will buy again I cannot rate durability since its new to me. And the value of one bolt that might just rescue your ride or race or weekend .View Detail

Very good price, bearings are really good quality,japan made.A great product that I would recommend for any bike.Very basic. Bearings decent quality, but plates thin and soft. Noticeable performance, but I think the more expensive models are not softer and more durable. Buy again, possibly because of the third price of more expensive items.Highly recommened.View Detail

Great no more ticking.Great chain and guide at a good price. I took the engine apart so I put in a new cam chain and guide to freshen it up!. Excellent quality, made by the original Honda OEM manufacturer. It was produced in China before, it didn't take long. Always choose oem parts.Thanks Webike, I can find oem parts at a very good price, with very nice packaging and fast shipping.View Detail

Great chain and guide at a good price.Had the motor apart so i put a new cam chain nd guide in to freshin it up!.Excellent quality, made by the original Honda OEM manufacturer.I've. used it made in China before, it didn't last long. Always choose oem parts.View Detail