176.19 EUR
(28,716 JPY)
4 (5 Artikkelit)
Very Good
Looks like Jeans functioning leather pants!I have been looking for riding pants for a long time that I could use on a daily basis and I found this product about a year ago From I don't know if I should buy it... or not I was struggling with a bit of extra income It's now or never! I bought it
He's a fine middle-aged man, 5'7" tall, 63 pounds, Waist 82 cm, and when he eats The more I ate, the more my belly came out, and I had a physical the other day, and I had to reevaluate my lifestyle to make sure I was over 85 cm in circumference I was instructed
It doesn't matter, but I got lost in the Size selection, and if you choose MSize as normal, you can choose Exactly, but I have back pain, so when I go touring, I go to Corset ( (Thin SupporterType) to go around the waist I wanted more room around the waist, so after some hesitation, I chose the LSize
When you actually put the product on, there is plenty of room for the Corset with the Corset wrapped around your waist and the MSize The inseam is the same for the M and L, but the hemline, thighs, Hip, Waist, and the entire body is the same There seems to be a difference in the Large size in terms of the target As a result, I think MSize is appropriate for my body type instead of LSize
I've been wearing them to work almost every day since I received them, and although the fabric of this product is Jeans on the front, it's The lining is mesh ground like leather pants Thick leather is applied to the inner side of the calf and thighs to block the heat from the Including the rubber knee protector also feels close to the weight of the leather pants It's a great way to keep the sun off your face Also, the fabric is thicker than usual Jeans, so it blocks a lot of heat from direct sunlight Thanks to this, it's a little easier to get out of the hot sun
Other than riding boots and shoes, it's not necessary to use it as a motorcycle If you don't raise the hem of the dress, it will look like hakama and will drag the hem If you need it, you might want to hemming up the hem..
Finally, Maintenance, but as noted, it is Large strange to wash, so I am I wash it normally However, it's a hassle if it's a color transfer to other laundry, so I wash it with Single Item and it's hard to dry I've even done it in the dryer (Gas) to dry it So far there has been no change except that it has shrunk a bit
It was a good product and if I need to replace it, I will buy the MSize next
Reviews For DEGNER Denim-housut OEM-nahkavyöllä From Other Webike User
Excellent
very goodI bought this for its thermal barrier effect.
The effect is a little thin when compared with HeatBlockLegSupporter of POI, but it is bearable at all.
Our specifications are 81cm inseam, Waist 88cm, and L Size is good, but I bought M Size because my legs are thin. Because it stretches a little, Waist was not tighter than I thought and was just right.
The hem will stay on the ground if you slip the Pants up, but is just fine if you ride a Motorcycle.
Right after I bought it, I had a strong feeling that my knee was being pulled, but after using it a few times, I got used to it and no longer had the feeling of being pulled.
I would highly recommend this product to any SS rider who likes Denim.View Detail
Very Good
Design is good and no loss to buy But be careful in choosing the size!I bought it because I liked the design I read other people's Impressions but I was very confused about the size choice I'm 174 in height and 58 kg in weight and I chose the M. The inseam is the same length for all sizes The inseam is the same length of all sizes, so when I think about Waist, I choose this size
It is made narrower overall and Denim fabric is thicker, so it looks even smaller It is designed with the assumption that you will be riding a motorcycle is a relief when you think about the fall
But if you have a tight forward leaning SS etc., the back of your knees will hurt because your legs are bent so tightly The Cruiser Type, which rides with its legs thrown forward I think Forwardfootpeg would be fine
I'm currently riding NAKED and I'm in a situation where I can withstand Limit I'd like to see the size around the knees reviewed and made with a little more room
I've been wondering if the inseam is a bit low-rise, and there's a Shirring underneath the belt I'm not going to be able to do this when I'm in my riding position on a motorcycle that is just too slippery It would be great if you could make the inseam deeper
The inseam could be extended by a couple of inches to make it just right for riding shoes other (esp. people)
The stitching through the Belt is in a bad shape and needs to be sturdier
If you can put a vertical Shirring on the opposite side of the outer Heat Guard of the thighs, you can put it in the winter I think it will give you more room when you wear InnerTights and so on
The design of the button seems to be too simple for ordinary Jeans on the market It was good to have about a few Buttons
It's thicker than the original, so it might be hot in mid-summer, and the pocket is deep enough to keep things in It is safe to ride a motorcycle and not to drop it You should think of Pocket as just a way to keep Key in it
The first size I wrote about was 2XL because of the knee circumference, but if you choose that size, you'll be able to get a better fit I chose the M because the Waist would be a governor, but I think the L would have been fine
I've been wearing them for a while now I've written various negative imprints, but overall I'm satisfied with themView Detail
Very Good
If you're a Motorcycle riding Jeans, this is it!When it comes to everyday wear, I feel that it is a little bit heavy, but Riding has a lot to say about it It is not
The lining is pretty solid, so it's a bit too hot for me to wear in the summer, even for Jeans I'm not going to be able to tell you what to do I'm a little thicker in the thighs, but the M size fits me perfectly I also use DEGNER's pants, but the Waist is loose, so even if my belly is showing It's good to go It's solid, so it's going to last a long timeView Detail
Excellent
This is a good oneWhen I bought a motorcycle, I bought leather pants I bought these pants when I bought a motorcycle, but I immediately gained a lot of weight and bought them again I need to buy the size of these pants with Heat Guard because I have an air-cooled engine Purchased after checking There is leather sewn into the inner thighs for easy knee grip, above the knee and at the waist The Shirring is in there so it doesn't feel too tight The Heat Guard does a great job with the built-in pads in the knee area It's a great way to get a good grip on your bike and not have to worry about burns in the summer It gives you a firm knee grip and makes it easier to maneuver your motorcycle The more beginner you are, the better you should wear themView Detail
Most Viewed Reviews Of DEGNER Denim / Jeans
Excellent
牛仔骑行裤我的坐骑是川崎2019款的W800复古摩托车,所以选择装备的时候一般都会选择适合复古车的类型。webike网站是很好的选择。这款骑行裤非常适合复古的风格。内侧有黑色皮质的放摩擦材料组成。穿着起来样子也是非常的帅气。唯一的缺陷就是和照片比起来,颜色似乎要更深一些。----------------------------------------------My horse is a section of the 2019 Kawasaki W800 retro motorcycle, so when the choice of equipment usually choose the type of retro cars. webike site is a good choice. The riding pants is ideal for retro style. Friction material discharge medial cortex black. Dressed up look is very handsome. The only flaw is compared and photos, the color seems to be deeper.Powered by Google TranslatorView Detail
Very Good
Size feelingLarge fineness170cm, 58kg, slim build.
Before purchasing here, I went to a certain Motorcycle shop with the intention of purchasing, but they didn't have the VintageNavy color that I wanted in stock and they had Black, so I tried on the M Size and it was too big for me, so I tried on the S Size. But the Hem under the foot was about Limit rubbing on the floor in the state of bending the knee astride the motorcycle would be just right, and if I put on riding shoes, it would be like I was on top of the shoes and there would be no rubbing on the ground. I thought I would buy Black and go home, but in the end I went home without buying
I bought the color VintageNavy that I wanted from webike! 。 In mid-October, I left my house after 7:00 a.m. on a business trip and drove on the highway for about 30 minutes in temperatures below 15 degrees, but I didn't feel cold at all!
I think it was over 20 degrees around noon, but of course it was not a problem while I was riding my motorcycle, it was just a little hot when I stopped. It was about the same. I think that it can be used except for the summer.
As I expected, the longer hems are also great when riding a motorcycle with bent knees.
But still, I was trying it on and Yo Cutter!
By the way, Design is DEGNER and Made in Pakis Tan
The price of this and a certain Motorcycle shop was exactly the same.View Detail
Excellent
very goodI bought this for its thermal barrier effect.
The effect is a little thin when compared with HeatBlockLegSupporter of POI, but it is bearable at all.
Our specifications are 81cm inseam, Waist 88cm, and L Size is good, but I bought M Size because my legs are thin. Because it stretches a little, Waist was not tighter than I thought and was just right.
The hem will stay on the ground if you slip the Pants up, but is just fine if you ride a Motorcycle.
Right after I bought it, I had a strong feeling that my knee was being pulled, but after using it a few times, I got used to it and no longer had the feeling of being pulled.
I would highly recommend this product to any SS rider who likes Denim.View Detail
Very Good
Design is good and no loss to buy But be careful in choosing the size!I bought it because I liked the design I read other people's Impressions but I was very confused about the size choice I'm 174 in height and 58 kg in weight and I chose the M. The inseam is the same length for all sizes The inseam is the same length of all sizes, so when I think about Waist, I choose this size
It is made narrower overall and Denim fabric is thicker, so it looks even smaller It is designed with the assumption that you will be riding a motorcycle is a relief when you think about the fall
But if you have a tight forward leaning SS etc., the back of your knees will hurt because your legs are bent so tightly The Cruiser Type, which rides with its legs thrown forward I think Forwardfootpeg would be fine
I'm currently riding NAKED and I'm in a situation where I can withstand Limit I'd like to see the size around the knees reviewed and made with a little more room
I've been wondering if the inseam is a bit low-rise, and there's a Shirring underneath the belt I'm not going to be able to do this when I'm in my riding position on a motorcycle that is just too slippery It would be great if you could make the inseam deeper
The inseam could be extended by a couple of inches to make it just right for riding shoes other (esp. people)
The stitching through the Belt is in a bad shape and needs to be sturdier
If you can put a vertical Shirring on the opposite side of the outer Heat Guard of the thighs, you can put it in the winter I think it will give you more room when you wear InnerTights and so on
The design of the button seems to be too simple for ordinary Jeans on the market It was good to have about a few Buttons
It's thicker than the original, so it might be hot in mid-summer, and the pocket is deep enough to keep things in It is safe to ride a motorcycle and not to drop it You should think of Pocket as just a way to keep Key in it
The first size I wrote about was 2XL because of the knee circumference, but if you choose that size, you'll be able to get a better fit I chose the M because the Waist would be a governor, but I think the L would have been fine
I've been wearing them for a while now I've written various negative imprints, but overall I'm satisfied with themView Detail
Very Good
If you're a Motorcycle riding Jeans, this is it!When it comes to everyday wear, I feel that it is a little bit heavy, but Riding has a lot to say about it It is not
The lining is pretty solid, so it's a bit too hot for me to wear in the summer, even for Jeans I'm not going to be able to tell you what to do I'm a little thicker in the thighs, but the M size fits me perfectly I also use DEGNER's pants, but the Waist is loose, so even if my belly is showing It's good to go It's solid, so it's going to last a long timeView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING